Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1660102

[PATCH v8 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b

From Steve Longerbeam <slongerbeam@gmail.com>
Newsgroups linux.kernel
Subject [PATCH v8 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
Date 2017-06-07 20:50 +0200
Message-ID <tPObN-1TW-43@gated-at.bofh.it> (permalink)
References <tPO26-1PO-7@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


The reset pin to the port expander chip (MAX7310) is controlled by a gpio,
so define a reset-gpios property to control it. There are three MAX7310's
on the SabreAuto CPU card (max7310_[abc]), but all use the same pin for
their reset. Since all can't acquire the same pin, assign it to max7310_b,
that chip is needed by more functions (usb and adv7180).

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index c8e35c4..21dea5f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -136,6 +136,9 @@
 				reg = <0x32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 			};
 
 			max7310_c: gpio@34 {
@@ -441,6 +444,12 @@
 			>;
 		};
 
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
-- 
2.7.4

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v8 00/34] i.MX Media Driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 28/34] media: imx: csi: add frame skipping support Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 11/34] ARM: dts: imx6-sabreauto: create i2cmux for i2c3 Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 26/34] media: imx: csi: add support for bayer formats Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 31/34] media: imx: capture: add frame sizes/interval enumeration Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 25/34] media: imx: Add MIPI CSI-2 Receiver subdev driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 32/34] media: imx: set and propagate default field, colorimetry Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 33/34] media: imx: Drop warning upon multiple S_STREAM disable calls Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 30/34] media: imx: csi: add frame size/interval enumeration Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 16/34] platform: add video-multiplexer subdevice driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:40 +0200
  [PATCH v8 09/34] ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 18/34] media: Add userspace header file for i.MX Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 07/34] ARM: dts: imx6qdl: add capture-subsystem device Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 15/34] add mux and video interface bridge entity functions Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 23/34] media: imx: Add VDIC subdev driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 04/34] ARM: dts: imx6qdl: add multiplexer controls Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 21/34] media: imx: Add Capture Device Interface Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 13/34] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 06/34] ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 12/34] ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 03/34] [media] dt/bindings: Add bindings for OV5640 Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  [PATCH v8 01/34] dt-bindings: Add bindings for video-multiplexer device Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 20:50 +0200
  Re: [PATCH v8 00/34] i.MX Media Driver Hans Verkuil <hverkuil@xs4all.nl> - 2017-06-07 21:10 +0200
    Re: [PATCH v8 00/34] i.MX Media Driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-07 21:10 +0200
    Re: [PATCH v8 00/34] i.MX Media Driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-10 01:20 +0200
    Re: [PATCH v8 00/34] i.MX Media Driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-10 01:20 +0200
      Re: [PATCH v8 00/34] i.MX Media Driver Hans Verkuil <hverkuil@xs4all.nl> - 2017-06-10 01:30 +0200
        Re: [PATCH v8 00/34] i.MX Media Driver Pavel Machek <pavel@ucw.cz> - 2017-06-10 09:40 +0200
        Re: [PATCH v8 00/34] i.MX Media Driver Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> - 2017-06-11 22:10 +0200
          Re: [PATCH v8 00/34] i.MX Media Driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-12 20:20 +0200
  Re: [PATCH v8 19/34] media: Add i.MX media core driver Philipp Zabel <p.zabel@pengutronix.de> - 2017-06-09 15:20 +0200
    Re: [PATCH v8 19/34] media: Add i.MX media core driver Steve Longerbeam <slongerbeam@gmail.com> - 2017-06-10 01:10 +0200
  Re: [PATCH v8 17/34] [media] add Omnivision OV5640 sensor driver Sakari Ailus <sakari.ailus@iki.fi> - 2017-06-11 00:00 +0200

csiph-web