Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1659752

Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller

Show key headers only | View raw

On 07/06/2017 13:07, Alexander Stein wrote:
> On Wednesday 07 June 2017 12:11:45, Phil Elwell wrote:
>> Devices in the AUX block share a common interrupt line, with a register
>> indicating which devices have active IRQs. Expose this as a nested
>> interrupt controller to avoid IRQ sharing problems (easily observed if
>> UART1 and SPI1/2 are enabled simultaneously).
>>
>> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
>> ---
>>  drivers/clk/bcm/clk-bcm2835-aux.c | 120
>> ++++++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+)
>>
>> diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c
>> b/drivers/clk/bcm/clk-bcm2835-aux.c index bd750cf..41e0702 100644
>> --- a/drivers/clk/bcm/clk-bcm2835-aux.c
>> +++ b/drivers/clk/bcm/clk-bcm2835-aux.c
>> [...]
>> +struct auxirq_state {
>> +	void __iomem      *status;
>> +	u32                enables;
>> +	struct irq_domain *domain;
>> +	struct regmap     *local_regmap;
>> +};
>> +
>> +static struct auxirq_state auxirq __read_mostly;
>> +
>> +static irqreturn_t bcm2835_auxirq_handler(int irq, void *dev_id)
>> +{
>> +	u32 stat = readl_relaxed(auxirq.status);
>> +	u32 masked = stat & auxirq.enables;
> 
> Doesn't this hide any spurious interrupts? Is this acceptable? I mean getting 
> informed about spurious interrupts seems nice to me, as it indicates a 
> hardware/configuration problem.

Thanks for the reply. This interrupt handler is capable of dispatching multiple
interrupts but must return a single value - IRQ_HANDLED or IRQ_NONE. I've assumed
that returning IRQ_NONE repeatedly will trigger the spurious interrupt detection.

This implementation returns IRQ_HANDLED if any unmasked interrupts are raised,
otherwise it returns IRQ_NONE. Therefore provided any spurious interrupt isn't
always coincident with a real interrupt then it ought eventually to be identified
as spurious. The alternative - returning IRQ_NONE if there are any spurious
interrupts - seems prone to causing collateral damage.

What did you have in mind?

>> +	if (masked & BCM2835_AUXIRQ_UART_MASK)
>> +		generic_handle_irq(irq_linear_revmap(auxirq.domain,
>> +						     BCM2835_AUXIRQ_UART_IRQ));
>> +
>> +	if (masked & BCM2835_AUXIRQ_SPI1_MASK)
>> +		generic_handle_irq(irq_linear_revmap(auxirq.domain,
>> +						     BCM2835_AUXIRQ_SPI1_IRQ));
>> +
>> +	if (masked & BCM2835_AUXIRQ_SPI2_MASK)
>> +		generic_handle_irq(irq_linear_revmap(auxirq.domain,
>> +						     BCM2835_AUXIRQ_SPI2_IRQ));
>> +
>> +	return (masked & BCM2835_AUXIRQ_ALL_MASK) ? IRQ_HANDLED : IRQ_NONE;
>> +}
> 
> How does interrupt acknowledgement work in these 3 interrupts work?

The interrupt "controller" is just combinatorial logic on the three level-sensitive
interrupt lines from the devices. Interrupts must be acknowledged and cleared at
source.

Phil

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Phil Elwell <phil@raspberrypi.org> - 2017-06-07 13:20 +0200
  Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Alexander Stein <alexanders83@web.de> - 2017-06-07 14:10 +0200
    Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Phil Elwell <phil@raspberrypi.org> - 2017-06-07 14:40 +0200
      Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Alexander Stein <alexanders83@web.de> - 2017-06-07 19:30 +0200
        Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Phil Elwell <phil@raspberrypi.org> - 2017-06-07 22:50 +0200
  Re: [PATCH 1/2] clk: bcm2835: Add AUX interrupt controller Stefan Wahren <stefan.wahren@i2se.com> - 2017-06-07 23:00 +0200

csiph-web