[PATCH v4 3/6] ARM: at91: Add armv7m support

From	Alexandre Belloni <alexandre.belloni@free-electrons.com>
Newsgroups	linux.kernel
Subject	[PATCH v4 3/6] ARM: at91: Add armv7m support
Date	2017-06-01 22:10 +0200
Message-ID	<tNEzT-7oF-7@gated-at.bofh.it> (permalink)
References	<tNEzT-7oF-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

From: Szemző András <sza@esh.hu>

Add Atmel SAME70/SAMS70/SAMV71 SoC support.

Signed-off-by: Szemző András <sza@esh.hu>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig       | 10 +++++++++-
 arch/arm/mach-at91/Makefile      |  1 +
 arch/arm/mach-at91/Makefile.boot |  3 +++
 arch/arm/mach-at91/samv7.c       | 25 +++++++++++++++++++++++++
 4 files changed, 38 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-at91/Makefile.boot
 create mode 100644 arch/arm/mach-at91/samv7.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841e924143f9..2594b6a412f0 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,12 +1,20 @@
 menuconfig ARCH_AT91
 	bool "Atmel SoCs"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
 	select COMMON_CLK_AT91
 	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
 
 if ARCH_AT91
+config SOC_SAMV7
+	bool "SAM Cortex-M7 family" if ARM_SINGLE_ARMV7M
+	select COMMON_CLK_AT91
+	select PINCTRL_AT91
+	help
+	  Select this if you are using an SoC from Atmel's SAME7, SAMS7 or SAMV7
+	  families.
+
 config SOC_SAMA5D2
 	bool "SAMA5D2 family"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index cfd8f60a9268..a189081dccc0 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
+obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
new file mode 100644
index 000000000000..eacfc3f5c33e
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -0,0 +1,3 @@
+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c
new file mode 100644
index 000000000000..11386f190c83
--- /dev/null
+++ b/arch/arm/mach-at91/samv7.c
@@ -0,0 +1,25 @@
+/*
+ *  Setup code for SAMv7x
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2016 Andras Szemzo <szemzo.andras@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+#include "generic.h"
+
+static const char *const samv7_dt_board_compat[] __initconst = {
+	"atmel,samv7",
+	NULL
+};
+
+DT_MACHINE_START(samv7_dt, "Atmel SAMV7")
+	.dt_compat	= samv7_dt_board_compat,
+MACHINE_END
-- 
2.11.0

Thread

[PATCH v4 0/6] ARM: at91: initial samx7 support Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 3/6] ARM: at91: Add armv7m support Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 4/6] ARM: at91: handle CONFIG_PM for armv7m configurations Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 5/6] ARM: at91: add armv7m SoC detection Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 6/6] ARM: at91: debug: add samv7x support Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 1/6] ARM: at91: Documentation: add armv7m families Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  [PATCH v4 2/6] ARM: at91: Document armv7m compatibles Alexandre Belloni <alexandre.belloni@free-electrons.com> - 2017-06-01 22:10 +0200
  Re: [PATCH v4 0/6] ARM: at91: initial samx7 support Nicolas Ferre <nicolas.ferre@microchip.com> - 2017-06-02 09:30 +0200

csiph-web