Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1653420

Re: Device address specific mapping of arm,mmu-500

Show all headers | View raw

On 30/05/17 18:16, Ray Jui wrote:
> Hi Marc,
> 
> On 5/30/17 9:59 AM, Marc Zyngier wrote:
>> On 30/05/17 17:49, Ray Jui wrote:
>>> Hi Will,
>>>
>>> On 5/30/17 8:14 AM, Will Deacon wrote:
>>>> On Mon, May 29, 2017 at 06:18:45PM -0700, Ray Jui wrote:
>>>>> I'm writing to check with you to see if the latest arm-smmu.c driver in
>>>>> v4.12-rc Linux for smmu-500 can support mapping that is only specific to
>>>>> a particular physical address range while leave the rest still to be
>>>>> handled by the client device. I believe this can already be supported by
>>>>> the device tree binding of the generic IOMMU framework; however, it is
>>>>> not clear to me whether or not the arm-smmu.c driver can support it.
>>>>>
>>>>> To give you some background information:
>>>>>
>>>>> We have a SoC that has PCIe root complex that has a build-in logic block
>>>>> to forward MSI writes to ARM GICv3 ITS. Unfortunately, this logic block
>>>>> has a HW bug that causes the MSI writes not parsed properly and can
>>>>> potentially corrupt data in the internal FIFO. A workaround is to have
>>>>> ARM MMU-500 takes care of all inbound transactions. I found that is
>>>>> working after hooking up our PCIe root complex to MMU-500; however, even
>>>>> with this optimized arm-smmu driver in v4.12, I'm still seeing a
>>>>> significant Ethernet throughput drop in both the TX and RX directions.
>>>>> The throughput drop is very significant at around 50% (but is already
>>>>> much improved compared to other prior kernel versions at 70~90%).
>>>>
>>>> Did Robin's experiments help at all with this?
>>>>
>>>> http://www.linux-arm.org/git?p=linux-rm.git;a=shortlog;h=refs/heads/iommu/perf
>>>>
>>>
>>> It looks like these are new optimizations that have not yet been merged
>>> in v4.12? I'm going to give it a try.
>>>
>>>>> One alternative is to only use MMU-500 for MSI writes towards
>>>>> GITS_TRANSLATER register in the GICv3, i.e., if I can define a specific
>>>>> region of physical address that I want MMU-500 to act on and leave the
>>>>> rest of inbound transactions to be handled directly by our PCIe
>>>>> controller, it can potentially work around the HW bug we have and at the
>>>>> same time achieve optimal throughput.
>>>>
>>>> I don't think you can bypass the SMMU for MSIs unless you give them their
>>>> own StreamIDs, which is likely to break things horribly in the kernel. You
>>>> could try to create an identity mapping, but you'll still have the
>>>> translation overhead and you'd probably end up having to supply your own DMA
>>>> ops to manage the address space. I'm assuming that you need to prevent the
>>>> physical address of the ITS from being allocated as an IOVA?
>>>
>>> Will, is that a HW limitation that the SMMU cannot be used, only for MSI
>>> writes, in which case, the physical address range is very specific in
>>> our ASIC that falls in the device memory region (e.g., below 0x80000000)?
>>>
>>> In fact, what I need in this case is a static mapping from IOMMU on the
>>> physical address of the GITS_TRANSLATER of the GICv3 ITS, which is the
>>> address that MSI writes go to. This is to bypass the MSI forwarding
>>> logic in our PCIe controller. At the same time, I can leave the rest of
>>> inbound transactions to be handled by our PCIe controller without going
>>> through the MMU.
>>
>> How is that going to work for DMA? I imagine your network interfaces do
>> have to access memory, don't they? How can the transactions be
>> terminated in the PCIe controller?
> 
> Sorry, I may not phrase this properly. These inbound transactions (DMA
> write to DDR, from endpoint) do not terminate in the PCIe controller.
> They are taken by the PCIe controller as PCIe transactions and will be
> carried towards the designated memory on the host.

So what is the StreamID used for these transactions? Is that a different
StreamID from that of the DMAing device? If you want to avoid the SMMU
effect on the transaction, you must make sure if doesn't match anything
there.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-30 03:20 +0200
  Re: Device address specific mapping of arm,mmu-500 Will Deacon <will.deacon@arm.com> - 2017-05-30 17:20 +0200
    Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-30 18:50 +0200
      Re: Device address specific mapping of arm,mmu-500 Marc Zyngier <marc.zyngier@arm.com> - 2017-05-30 19:10 +0200
        Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-30 19:20 +0200
          Re: Device address specific mapping of arm,mmu-500 Marc Zyngier <marc.zyngier@arm.com> - 2017-05-30 19:30 +0200
            Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-31 00:10 +0200
              Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-31 08:20 +0200
                Re: Device address specific mapping of arm,mmu-500 Will Deacon <will.deacon@arm.com> - 2017-05-31 14:50 +0200
                Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-05-31 19:40 +0200
                Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-06-05 20:10 +0200
                Re: Device address specific mapping of arm,mmu-500 Robin Murphy <robin.murphy@arm.com> - 2017-06-06 12:10 +0200
                Re: Device address specific mapping of arm,mmu-500 Ray Jui <ray.jui@broadcom.com> - 2017-06-07 08:30 +0200
      Re: Device address specific mapping of arm,mmu-500 Robin Murphy <robin.murphy@arm.com> - 2017-05-30 19:30 +0200

csiph-web