Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1652823

[PATCH v2 0/2] reset: Basic reset controller

Show all headers | View raw

Hello,

This is v2 of the basic reset controller, which addresses the points that
Philipp made. See the individual patches for changelogs. The original cover
letter follows:

In the Aspeed SoCs we have some reset registers spread out in various parts of
the soc: in the system controller IP, as well as other peripherals. I need to be
able to deassert those resets before other drivers work.

In writing a driver to do this I realised it was very generic. So instead I've
sent a generic driver that can be used by the device tree to clear reset lines
described by single bits in a register.

I've tested this driver on our SoC to release the UART reset.

Joel Stanley (2):
  dt-bindings: reset: Add bindings for basic reset controller
  reset: Add basic single-register reset driver

 .../devicetree/bindings/reset/reset-basic.txt      |  43 ++++++++
 drivers/reset/Kconfig                              |   7 ++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-basic.c                        | 113 +++++++++++++++++++++
 4 files changed, 164 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/reset-basic.txt
 create mode 100644 drivers/reset/reset-basic.c

-- 
2.11.0

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 0/2] reset: Basic reset controller Joel Stanley <joel@jms.id.au> - 2017-05-30 08:10 +0200
  [PATCH v2 1/2] dt-bindings: reset: Add bindings for basic reset controller Joel Stanley <joel@jms.id.au> - 2017-05-30 08:10 +0200

csiph-web