Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1650550

Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for DE2 display pipeline

Show all headers | View raw

On Thu, May 25, 2017 at 9:54 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
>
>
> 于 2017年5月25日 GMT+08:00 下午4:37:31, Chen-Yu Tsai <wens@csie.org> 写到:
>>On Wed, May 24, 2017 at 7:17 PM, Icenowy Zheng <icenowy@aosc.io> wrote:
>>> Allwinner V3s SoC features a "Display Engine 2.0" with only one mixer
>>> and only one TCON connected to this mixer, which have RGB LCD output.
>>>
>>> Add device nodes for this display pipeline.
>>>
>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>>> ---
>>>  arch/arm/boot/dts/sun8i-v3s.dtsi | 83
>>++++++++++++++++++++++++++++++++++++++++
>>>  1 file changed, 83 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi
>>b/arch/arm/boot/dts/sun8i-v3s.dtsi
>>> index a49ebef53c91..3a06dc5b3746 100644
>>> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
>>> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
>>> @@ -61,6 +61,12 @@
>>>                 };
>>>         };
>>>
>>> +       de: display-engine {
>>> +               compatible = "allwinner,sun8i-v3s-display-engine";
>>> +               allwinner,pipelines = <&mixer0>;
>>> +               status = "disabled";
>>> +       };
>>> +
>>>         timer {
>>>                 compatible = "arm,armv7-timer";
>>>                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
>>IRQ_TYPE_LEVEL_LOW)>,
>>> @@ -95,6 +101,83 @@
>>>                 #size-cells = <1>;
>>>                 ranges;
>>>
>>> +               display_clocks: clock@1000000 {
>>> +                       compatible = "allwinner,sun8i-v3s-de2-clk";
>>> +                       reg = <0x01000000 0x100000>;
>>> +                       clocks = <&ccu CLK_DE>,
>>> +                                <&ccu CLK_BUS_DE>;
>>> +                       clock-names = "mod",
>>> +                                     "bus";
>>> +                       resets = <&ccu RST_BUS_DE>;
>>> +                       #clock-cells = <1>;
>>> +                       #reset-cells = <1>;
>>> +               };
>>> +
>>> +               mixer0: mixer@1100000 {
>>
>>Since there's only one, can you drop the numbering suffix?
>>Same with the TCON.
>
> I just want to keep the consistency with dual-pipeline SoCs. (H3, A64, H5, etc)
>
> However, if dropping it is better, I will drop it -- I think usually for things
> that is available for multiple on some SoCs and single on others,
> we keep the 0 in node name...

You might want that if you were going to include it in another SoC's dtsi
file, such as the situation with A23/A33. However that is not the case here.
Moreover, the datasheet lists them without the number.

>
>>
>>> +                       compatible = "allwinner,sun8i-v3s-de2-mixer";
>>> +                       reg = <0x01100000 0x100000>;
>>
>>The display engine also has an interrupt. Please list it
>
> It's a overall interrupt for DE2, not mixer interrupt.
>
> I will add it after we have proper interrupt chaining facility for DE2.
>
> It cannot fit here in mixer node.

Could you elaborate? If it is just shared, then listing it several times
is OK. If the interrupt registers are not in this address space, then
I agree, it needs to be dealt with separately and not added here. However
some thought should be given about how the device tree binding should be.

ChenYu

>
>>
>>ChenYu
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for  DE2 display pipeline Chen-Yu Tsai <wens@csie.org> - 2017-05-25 10:40 +0200
  Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for DE2 display pipeline Icenowy Zheng <icenowy@aosc.io> - 2017-05-25 16:00 +0200
    Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for  DE2 display pipeline Chen-Yu Tsai <wens@csie.org> - 2017-05-25 16:30 +0200
      Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for DE2 display pipeline Icenowy Zheng <icenowy@aosc.io> - 2017-05-25 16:40 +0200
        Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for  DE2 display pipeline Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-05-29 11:10 +0200
          Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for  DE2 display pipeline icenowy@aosc.io - 2017-05-29 15:10 +0200
            Re: [linux-sunxi] [PATCH 1/2] ARM: sun8i: v3s: add device nodes for  DE2 display pipeline Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-06-03 00:20 +0200

csiph-web