Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1641245

Re: [PATCH v3 6/6] watchdog: ts4600: add driver for TS-4600 watchdog

Show all headers | View raw

On Sun, May 14, 2017 at 07:39:33AM -0700, Guenter Roeck wrote:
> On 05/11/2017 12:22 AM, Shawn Guo wrote:
> >On Fri, May 05, 2017 at 03:32:59PM -0400, Sebastien Bourdelin wrote:
> >>This watchdog is instantiated in a FPGA and can only be access using a
> >>GPIOs bit-banged bus, called the NBUS by Technologic Systems.
> >>The watchdog is made of only one register, called the feed register.
> >>Writing to this register will re-arm the watchdog for a given time (and
> >>enable it if it was disable). It can be disabled by writing a special
> >>value into it.
> >>
> >>Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
> >>---
> >>Changes v2 -> v3:
> >>  - rebase on master
> >>  - remove the timeout table to simplify the logic (suggested by
> >>  Guenter Roeck)
> >>  - fix the set_timeout function (suggested by Guenter Roeck)
> >>  - hardcode the max_hw_heartbeat_ms value based on the ts4600 max
> >>  timeout value supported (suggested by Guenter Roeck)
> >>  - remove the max_timeout usage and set a default timeout value
> >>(suggested by Guenter Roeck)
> >>  - use the devm_watchdog_register_device function instead of
> >>  watchdog_register_device (suggested by Guenter Roeck)
> >>
> >>Changes v1 -> v2:
> >>  - rebase on master
> >>  - retrieve the ts_nbus instantiated by the parent node (suggested by
> >>  Linus Walleij)
> >>  - rename the wdt by watchdog in the device tree and in the
> >>  documentation (suggested by Rob Herring)
> >>  - add a dependency to the TS_NBUS driver in the Kconfig (suggested by
> >>  Guenter Roeck)
> >>  - simplify the set_timeout function (suggested by Guenter Roeck)
> >>  - use the max_hw_heartbeat_ms callback instead of the max_timeout
> >>  callback (suggested by Guenter Roeck)
> >>---
> >> .../devicetree/bindings/watchdog/ts4600-wdt.txt    |  16 ++
> >> arch/arm/boot/dts/imx28-ts4600-common.dtsi         |   5 +
> >
> >The dts change shouldn't be mixed within driver patch.
> >
> 
> Maybe, but Rob Acked the devicetree changes, so I don't see a reason
> for splitting it up now.

What Rob Acked is devicetree bindings, and ARM dts changes should
normally go via arm-soc tree, unless there is a good reason they
shouldn't.

Shawn

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v3 6/6] watchdog: ts4600: add driver for TS-4600 watchdog Guenter Roeck <linux@roeck-us.net> - 2017-05-14 16:40 +0200
  Re: [PATCH v3 6/6] watchdog: ts4600: add driver for TS-4600 watchdog Shawn Guo <shawnguo@kernel.org> - 2017-05-15 04:10 +0200
    Re: [PATCH v3 6/6] watchdog: ts4600: add driver for TS-4600 watchdog Guenter Roeck <linux@roeck-us.net> - 2017-05-15 04:40 +0200

csiph-web