[PATCH v4 3/3] hwmon: (adt7475) add high frequency support

Path	csiph.com!aioe.org!bofh.it!news.nic.it!robomod
From	Chris Packham <chris.packham@alliedtelesis.co.nz>
Newsgroups	linux.kernel
Subject	[PATCH v4 3/3] hwmon: (adt7475) add high frequency support
Date	Mon, 15 May 2017 03:40:02 +0200
Message-ID	<tHd9n-1bf-5@gated-at.bofh.it> (permalink)
References	<tHd9n-1bf-3@gated-at.bofh.it>
Dkim-Signature	v=1; a=rsa-sha256; c=relaxed/relaxed; d=alliedtelesis.co.nz; s=mail; t=1494811841; bh=BAM3tVIBqx8JtcdrZhcY/O0DwX822hC2+1xz8SeVKu8=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=ONoUjakdYU9OtoXRp/vASnh0tTJ3ghqCTy0f7aGzdJyBw/dd3V2mKcE1Zg8nxOePm wPGFCPpqKUXZdwDTAZcGQPNskcwIiGKzxfYM0ahJdo2GGTq8vB39SbMFU5qSxS9e10 daKcU7JpqOUr0/PvVcmWYWR389SOp30JSLqbVqgc=
X-Mailer	git-send-email 2.11.0.24.ge6920cf
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	52
Organization	linux.* mail to news gateway
X-Original-Cc	Chris Packham <chris.packham@alliedtelesis.co.nz>, linux-kernel@vger.kernel.org
X-Original-Date	Mon, 15 May 2017 13:30:29 +1200
X-Original-Message-ID	<20170515013029.31397-4-chris.packham@alliedtelesis.co.nz>
X-Original-References	<20170515013029.31397-1-chris.packham@alliedtelesis.co.nz>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1641240

Show key headers only | View raw

Systems using 4-wire fans usually require high frequency (22.5kHz)
output on the pwm. Add 22500 as a valid option in the pwmfreq_table. In
high frequency mode the low-order bit are ignored so they can safely be
set to 0.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Changes in v3:
- New
Changes in v4:
- Fix pwmfreq_table array indexing

 drivers/hwmon/adt7475.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 3056076fae27..1baa213a60bd 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -934,7 +934,7 @@ static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
 
 /* List of frequencies for the PWM */
 static const int pwmfreq_table[] = {
-	11, 14, 22, 29, 35, 44, 58, 88
+	11, 14, 22, 29, 35, 44, 58, 88, 22500
 };
 
 static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
@@ -942,9 +942,10 @@ static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
 {
 	struct adt7475_data *data = adt7475_update_device(dev);
 	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int i = clamp_val(data->range[sattr->index] & 0xf, 0,
+			  ARRAY_SIZE(pwmfreq_table) - 1);
 
-	return sprintf(buf, "%d\n",
-		       pwmfreq_table[data->range[sattr->index] & 7]);
+	return sprintf(buf, "%d\n", pwmfreq_table[i]);
 }
 
 static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
@@ -965,7 +966,7 @@ static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
 
 	data->range[sattr->index] =
 		adt7475_read(TEMP_TRANGE_REG(sattr->index));
-	data->range[sattr->index] &= ~7;
+	data->range[sattr->index] &= ~0xf;
 	data->range[sattr->index] |= out;
 
 	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
-- 
2.11.0.24.ge6920cf

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 3/3] hwmon: (adt7475) add high frequency support Chris Packham <chris.packham@alliedtelesis.co.nz> - 2017-05-15 03:40 +0200
  Re: [PATCH v4 3/3] hwmon: (adt7475) add high frequency support Guenter Roeck <linux@roeck-us.net> - 2017-05-15 15:30 +0200
    Re: [PATCH v4 3/3] hwmon: (adt7475) add high frequency support Chris Packham <Chris.Packham@alliedtelesis.co.nz> - 2017-05-15 23:10 +0200

csiph-web