Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1641094

Re: [PATCH RFC] iio: pressure: zpa2326: report interrupted case as failure

Show all headers | View raw

On 14/05/17 10:46, Peter Meerwald-Stadler wrote:
> 
>> If the timeout-case prints a warning message then probably the interrupted
>> case should also. Further, wait_for_completion_interruptible_timeout()
>> returns long not int.
>>
>> Fixes: commit 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support")
>> Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
> 
> this is actually a v2, looks good to me
A formal ack would be good!  Anyhow, I'll take that as an informal one.

A typo in the error message that I've fixed.

Applied to the togreg branch of iio.git.  Will be pushed out as testing
for the autobuilders to play with it.

BTW I don't think this one really should have been an RFC. It's a clear
tidy up to some confusing code being proposed for inclusion rather than
to start a discussion!

Jonathan
> 
>> ---
>>
>> The original control-flow was technically not wrong just confusing and a bit
>> complicated. Not clear if reporting the interrupted case actually is useful,
>> but given that the timeout is relatively long (200ms) it is not that unlikely
>> so differentiating the cases seems helpful.
>>
>> Patch was compile-tested with: x86_64_defconfig + CONFIG_IIO=m, CONFIG_ZPA2326=m
>>
>> Patch is against v4.11 (localversion-next is next-20170512)
>>
>>   drivers/iio/pressure/zpa2326.c | 17 ++++++++++-------
>>   1 file changed, 10 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
>> index e58a0ad..617926f 100644
>> --- a/drivers/iio/pressure/zpa2326.c
>> +++ b/drivers/iio/pressure/zpa2326.c
>> @@ -867,12 +867,13 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
>>   {
>>   	int          ret;
>>   	unsigned int val;
>> +	long     timeout;
>>   
>>   	zpa2326_dbg(indio_dev, "waiting for one shot completion interrupt");
>>   
>> -	ret = wait_for_completion_interruptible_timeout(
>> +	timeout = wait_for_completion_interruptible_timeout(
>>   		&private->data_ready, ZPA2326_CONVERSION_JIFFIES);
>> -	if (ret > 0)
>> +	if (timeout > 0)
>>   		/*
>>   		 * Interrupt handler completed before timeout: return operation
>>   		 * status.
>> @@ -882,13 +883,15 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
>>   	/* Clear all interrupts just to be sure. */
>>   	regmap_read(private->regmap, ZPA2326_INT_SOURCE_REG, &val);
>>   
>> -	if (!ret)
>> +	if (!timeout) {
>>   		/* Timed out. */
>> +		zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
>> +			     timeout);
>>   		ret = -ETIME;
>> -
>> -	if (ret != -ERESTARTSYS)
>> -		zpa2326_warn(indio_dev, "no one shot interrupt occurred (%d)",
>> -			     ret);
>> +	} else if (timeout < 0) {
>> +		zpa2326_warn(indio_dev, "wait for one shot interrupt canceled");
cancelled. I'll fix that.
>> +		ret = -ERESTARTSYS;
>> +	}
>>   
>>   	return ret;
>>   }
>>
> 

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH RFC] iio: pressure: zpa2326: report interrupted case as failure Nicholas Mc Guire <der.herr@hofr.at> - 2017-05-14 10:50 +0200
  Re: [PATCH RFC] iio: pressure: zpa2326: report interrupted case as  failure Peter Meerwald-Stadler <pmeerw@pmeerw.net> - 2017-05-14 11:50 +0200
    Re: [PATCH RFC] iio: pressure: zpa2326: report interrupted case as  failure Nicholas Mc Guire <der.herr@hofr.at> - 2017-05-14 13:40 +0200
    Re: [PATCH RFC] iio: pressure: zpa2326: report interrupted case as  failure Jonathan Cameron <jic23@kernel.org> - 2017-05-14 16:30 +0200

csiph-web