Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1640089

Re: [PATCH v2] ARM: dts: imx6sx-sdb: Remove OPP override

Show all headers | View raw

On Fri, May 05, 2017 at 02:00:17PM +0300, Leonard Crestez wrote:
> The board file for imx6sx-sdb overrides cpufreq operating points to use
> higher voltages. This is done because the board has a shared rail for
> VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
> needs to be a value suitable for both ARM and SOC.
> 
> This only applies to LDO bypass mode, a feature not present in upstream.
> When LDOs are enabled the effect is to use higher voltages than necessary
> for no good reason.
> 
> Setting these higher voltages can make some boards fail to boot with ugly
> semi-random crashes reminiscent of memory corruption. These failures only
> happen on board rev. C, rev. B is reported to still work.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> CC: stable@vger.kernel.org

Applied, thanks.

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v2] ARM: dts: imx6sx-sdb: Remove OPP override Shawn Guo <shawnguo@kernel.org> - 2017-05-12 02:40 +0200

csiph-web