Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1638344

Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores

Show all headers | View raw

On 09/05/2017 19:14, Marc Zyngier wrote:
> On 09/05/17 19:08, Eric Anholt wrote:
>> Marc Zyngier <marc.zyngier@arm.com> writes:
>>
>>> On 09/05/17 17:59, Eric Anholt wrote:
>>>> Phil Elwell <phil@raspberrypi.org> writes:
>>>>
>>>>> In order to reduce power consumption and bus traffic, it is sensible
>>>>> for secondary cores to enter a low-power idle state when waiting to
>>>>> be started. The wfe instruction causes a core to wait until an event
>>>>> or interrupt arrives before continuing to the next instruction.
>>>>> The sev instruction sends a wakeup event to the other cores, so call
>>>>> it from bcm2836_smp_boot_secondary, the function that wakes up the
>>>>> waiting cores during booting.
>>>>>
>>>>> It is harmless to use this patch without the corresponding change
>>>>> adding wfe to the ARMv7/ARMv8-32 stubs, but if the stubs are updated
>>>>> and this patch is not applied then the other cores will sleep forever.
>>>>>
>>>>> See: https://github.com/raspberrypi/linux/issues/1989
>>>>>
>>>>> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
>>>>> ---
>>>>>  drivers/irqchip/irq-bcm2836.c | 3 +++
>>>>>  1 file changed, 3 insertions(+)
>>>>>
>>>>> diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
>>>>> index e10597c..6dccdf9 100644
>>>>> --- a/drivers/irqchip/irq-bcm2836.c
>>>>> +++ b/drivers/irqchip/irq-bcm2836.c
>>>>> @@ -248,6 +248,9 @@ static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
>>>>>  	writel(secondary_startup_phys,
>>>>>  	       intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
>>>>>
>>>>> +	dsb(sy); /* Ensure write has completed before waking the other CPUs */
>>>>> +	sev();
>>>>> +
>>>>>  	return 0;
>>>>>  }
>>>>
>>>> This is also the behavior that the standard arm64 spin-table method has,
>>>> which we unfortunately can't quite use.
>>>
>>> And why is that so? Why do you have to reinvent the wheel (and hide the
>>> cloned wheel in an interrupt controller driver)?
>>>
>>> That doesn't seem right to me.
>>
>> The armv8 stubs (firmware-supplied code in the low page that do the
>> spinning) do actually implement arm64's spin-table method.  It's the
>> armv7 stubs that use these registers in the irqchip instead of plain
>> addresses in system memory.
>
> Let's put ARMv7 aside for the time being. If your firmware already
> implements spin-tables, why don't you simply use that at least on arm64?

We do.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-09 11:00 +0200
  Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Eric Anholt <eric@anholt.net> - 2017-05-09 19:00 +0200
    Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-09 19:20 +0200
      Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Eric Anholt <eric@anholt.net> - 2017-05-09 20:10 +0200
        Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-09 20:20 +0200
          Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-09 20:50 +0200
            Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-09 21:00 +0200
              Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-09 21:10 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-10 09:50 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-10 10:30 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-10 11:00 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-10 11:10 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-10 12:10 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Phil Elwell <phil@raspberrypi.org> - 2017-05-10 12:40 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Florian Fainelli <f.fainelli@gmail.com> - 2017-05-10 18:30 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-10 19:20 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Florian Fainelli <f.fainelli@gmail.com> - 2017-05-10 20:00 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Eric Anholt <eric@anholt.net> - 2017-05-10 20:10 +0200
                Re: [PATCH] irq_bcm2836: Send event when onlining sleeping cores Marc Zyngier <marc.zyngier@arm.com> - 2017-05-10 20:30 +0200

csiph-web