Re: [PATCH v5] iio: adc: Add support for TI ADC108S102 and ADC128S102

From	Mika Westerberg <mika.westerberg@linux.intel.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v5] iio: adc: Add support for TI ADC108S102 and ADC128S102
Date	2017-05-08 13:30 +0200
Message-ID	<tEP1w-3ge-23@gated-at.bofh.it> (permalink)
References	<tEMwG-1z9-13@gated-at.bofh.it>
Organization	Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo

Show all headers | View raw

On Mon, May 08, 2017 at 10:46:43AM +0200, Jan Kiszka wrote:
> This is an upstream port of an IIO driver for the TI ADC108S102 and
> ADC128S102. The former can be found on the Intel Galileo Gen2 and the
> Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is
> included.
> 
> Due to the lack of regulators under ACPI, we hard-code the voltage
> provided to the VA pin of the ADC to 5 V, the value used on Galileo and
> IOT2000. For DT usage, the regulator "vref-supply" provides this
> information. Note that DT usage has not been tested.
> 
> Original author: Bogdan Pricop <bogdan.pricop@emutex.com>
> Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel:
> Todor Minchev <todor@minchev.co.uk>.
> 
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v5] iio: adc: Add support for TI ADC108S102 and ADC128S102 Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-08 10:50 +0200
  Re: [PATCH v5] iio: adc: Add support for TI ADC108S102 and  ADC128S102 Andy Shevchenko <andriy.shevchenko@linux.intel.com> - 2017-05-08 11:10 +0200
  Re: [PATCH v5] iio: adc: Add support for TI ADC108S102 and ADC128S102 Mika Westerberg <mika.westerberg@linux.intel.com> - 2017-05-08 13:30 +0200

csiph-web