Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1636429
| From | Vitaly Kuznetsov <vkuznets@redhat.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] xen-netfront: avoid crashing on resume after a failure in talk_to_netback() |
| Date | 2017-05-05 16:50 +0200 |
| Message-ID | <tDMIp-32j-7@gated-at.bofh.it> (permalink) |
| References | <tDo3n-3lL-17@gated-at.bofh.it> <tDqRA-5hr-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
David Miller <davem@davemloft.net> writes:
> From: Vitaly Kuznetsov <vkuznets@redhat.com>
> Date: Thu, 4 May 2017 14:23:04 +0200
>
>> Unavoidable crashes in netfront_resume() and netback_changed() after a
>> previous fail in talk_to_netback() (e.g. when we fail to read MAC from
>> xenstore) were discovered. The failure path in talk_to_netback() does
>> unregister/free for netdev but we don't reset drvdata and we try accessing
>> it again after resume.
>>
>> Reset drvdata in netback_changed() the same way we reset it in
>> netfront_probe() and check for NULL in both netfront_resume() and
>> netback_changed() to properly handle the situation.
>>
>> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
>
> The circumstances under which netfront_probe() NULLs out the device
> private is different than what you propose here, which is to do it
> on a live device in netback_changed() whilst mutliple susbsytems
> have a reference to this device and can call into the driver still.
>
> It is only legal to do this in the probe function because such
> references and execution possibilities do not exist at that point.
>
> What really needs to happen is that the xenbus_driver must be told to
> unregister this xen device and stop making calls into the driver for
> it before you release the netdev state.
>
> That is the only reasonable way to fix this bug.
True,
after looking at the issue again I realized that removing half of the
device in talk_to_netback() is a mistake - we should either treat errors
as fatal and remove the device completely or leave netdev in place
hoping that it'll magically got fixed later. I'm leaning towards the
former, I tried and the following simple patch does the job:
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 6ffc482..7b61adb 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1934,8 +1934,7 @@ static int talk_to_netback(struct xenbus_device *dev,
xennet_disconnect_backend(info);
xennet_destroy_queues(info);
out:
- unregister_netdev(info->netdev);
- xennet_free_netdev(info->netdev);
+ device_unregister(&dev->dev);
return err;
}
In case noone is against this big hammer I can send this as v2.
Thank you for your feedback, David!
--
Vitaly
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH] xen-netfront: avoid crashing on resume after a failure in talk_to_netback() Vitaly Kuznetsov <vkuznets@redhat.com> - 2017-05-04 14:30 +0200
Re: [PATCH] xen-netfront: avoid crashing on resume after a failure in talk_to_netback() David Miller <davem@davemloft.net> - 2017-05-04 17:30 +0200
Re: [PATCH] xen-netfront: avoid crashing on resume after a failure in talk_to_netback() Vitaly Kuznetsov <vkuznets@redhat.com> - 2017-05-05 16:50 +0200
csiph-web