[PATCH 1/2] regulator: tps65086: Fix expected switch DT node names

From	"Andrew F. Davis" <afd@ti.com>
Newsgroups	linux.kernel
Subject	[PATCH 1/2] regulator: tps65086: Fix expected switch DT node names
Date	2017-02-10 19:00 +0100
Message-ID	<t9nEd-6Co-7@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
---
 drivers/regulator/tps65086-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/tps65086-regulator.c b/drivers/regulator/tps65086-regulator.c
index ecb0371780af..84e8cb109269 100644
--- a/drivers/regulator/tps65086-regulator.c
+++ b/drivers/regulator/tps65086-regulator.c
@@ -157,8 +157,8 @@ static struct tps65086_regulator regulators[] = {
 			   VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
 			   tps65086_ldoa23_ranges, 0, 0),
 	TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
-	TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)),
-	TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)),
+	TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
+	TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
 	TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
 };
 
-- 
2.11.0

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] regulator: tps65086: Fix expected switch DT node names "Andrew F. Davis" <afd@ti.com> - 2017-02-10 19:00 +0100
  [PATCH 2/2] regulator: tps65086: Fix DT node referencing in of_parse_cb "Andrew F. Davis" <afd@ti.com> - 2017-02-10 19:00 +0100

csiph-web