Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1577976

RE: [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa or da are defined

Show all headers | View raw

> -----Original Message-----
> From: Bjorn Andersson [mailto:bjorn.andersson@linaro.org]
> Sent: Thursday, February 09, 2017 2:55 AM
> To: Loic PALLARDY <loic.pallardy@st.com>
> Cc: ohad@wizery.com; lee.jones@linaro.org; linux-
> remoteproc@vger.kernel.org; linux-kernel@vger.kernel.org;
> kernel@stlinux.com; Patrice CHOTARD <patrice.chotard@st.com>; Hugues
> FRUCHET <hugues.fruchet@st.com>; peter.griffin@linaro.org
> Subject: Re: [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa or
> da are defined
> 
> On Tue 31 Jan 04:35 PST 2017, Loic Pallardy wrote:
> 
> > Remoteproc doesn't check if firmware requests fixed
> > addresses for carveout regions.
> > Current assumption is that platform specific driver is in
> > charge of coprocessor specific memory region allocation and
> > remoteproc core doesn't have to handle them.
> > If a da or a pa is specified in firmware resource table, remoteproc
> > core doesn't have to perform any allocation.
> > Access to carveout will be done thanks to rproc_da_to_pa function,
> > which will provide virtual address on carveout region allocated
> > by platform specific driver.
> >
> > Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> > ---
> > No change since V1
> >
> >  drivers/remoteproc/remoteproc_core.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/remoteproc/remoteproc_core.c
> b/drivers/remoteproc/remoteproc_core.c
> > index 90b05c7..dd63ceed 100644
> > --- a/drivers/remoteproc/remoteproc_core.c
> > +++ b/drivers/remoteproc/remoteproc_core.c
> > @@ -622,6 +622,11 @@ static int rproc_handle_carveout(struct rproc
> *rproc,
> >  	dev_dbg(dev, "carveout rsc: name: %s, da 0x%x, pa 0x%x, len 0x%x,
> flags 0x%x\n",
> >  		rsc->name, rsc->da, rsc->pa, rsc->len, rsc->flags);
> >
> > +	if (rsc->pa != FW_RSC_ADDR_ANY || rsc->da !=
> FW_RSC_ADDR_ANY) {
> 
> For devices with an IOMMU it's valid to specify "da" and have the
> allocated region mapped there. So this is not correct.

You're right, moreover patch series touch only to pa, so even if da behavior should be changed, should be done in a dedicated patch.
I'll send a V4.

Regards,
Loic
> 
> Regards,
> Bjorn

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v3 0/4] remoteproc: st: add virtio_rpmsg support Loic Pallardy <loic.pallardy@st.com> - 2017-01-31 13:40 +0100
  [PATCH v3 3/4] remoteproc: st: add da to va support Loic Pallardy <loic.pallardy@st.com> - 2017-01-31 13:40 +0100
    Re: [v3,3/4] remoteproc: st: add da to va support Hugues FRUCHET <hugues.fruchet@st.com> - 2017-02-08 10:20 +0100
  [PATCH v3 1/4] remoteproc: st: correct probe error management Loic Pallardy <loic.pallardy@st.com> - 2017-01-31 13:40 +0100
    Re: [PATCH v3 1/4] remoteproc: st: correct probe error management Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-02-07 06:20 +0100
      RE: [PATCH v3 1/4] remoteproc: st: correct probe error management Loic PALLARDY <loic.pallardy@st.com> - 2017-02-07 23:30 +0100
  [PATCH v3 2/4] remoteproc: st: add virtio communication support Loic Pallardy <loic.pallardy@st.com> - 2017-01-31 13:40 +0100
  [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa or da are defined Loic Pallardy <loic.pallardy@st.com> - 2017-01-31 13:40 +0100
    Re: [v3, 4/4] remoteproc: core: don't allocate carveout if pa or da  are defined Hugues FRUCHET <hugues.fruchet@st.com> - 2017-02-08 10:20 +0100
    Re: [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa  or da are defined Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-02-09 03:30 +0100
      RE: [PATCH v3 4/4] remoteproc: core: don't allocate carveout if pa or  da are defined Loic PALLARDY <loic.pallardy@st.com> - 2017-02-09 22:40 +0100

csiph-web