Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1573116

[PATCH] regulator: gpio-regulator: doc: correct default type

Show all headers | View raw

The driver defaults to voltage, not current, type so correct 
this in the device tree binding documentation.

Signed-off-by: Hans Holmberg <hans@pixelmunchies.com>
---

See drivers/regulator/gpio-regulator.c:231
..and the example in the binding doc is voltage regulator 
without regulator-type specified.

 Documentation/devicetree/bindings/regulator/gpio-regulator.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
index e5cac1e..dd1ed78 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
 - startup-delay-us	: Startup time in microseconds.
 - enable-active-high	: Polarity of GPIO is active high (default is low).
 - regulator-type	: Specifies what is being regulated, must be either
-			  "voltage" or "current", defaults to current.
+			  "voltage" or "current", defaults to voltage.
 
 Any property defined as part of the core regulator binding defined in
 regulator.txt can also be used.
-- 
1.9.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH] regulator: gpio-regulator: doc: correct default type Hans Holmberg <hans@pixelmunchies.com> - 2017-02-03 15:30 +0100

csiph-web