Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1573011

[PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

From Lee Jones <lee.jones@linaro.org>
Newsgroups linux.kernel
Subject [PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line
Date 2017-02-03 11:30 +0100
Message-ID <t6JhU-kD-21@gated-at.bofh.it> (permalink)
References <t6JhT-kD-7@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.
This patch configures the UART RTS line as a GPIO for manipulation
within the UART driver when HW flow-control is not enabled.

Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih410-b2260.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 06b0696..fa16aba 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -63,6 +63,7 @@
 		uart0: serial@9830000 {
 			label = "LS-UART0";
 			status = "okay";
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Low speed expansion connector */
-- 
2.9.3

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v4 00/10] serial: st-asc: Allow handling of RTS lin Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 04/10] serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 01/10] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
    Re: [PATCH v4 06/10] dt-bindings: serial: Update 'uart-has-rtscts'  description Rob Herring <robh@kernel.org> - 2017-02-08 22:20 +0100
  [PATCH v4 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100
  [PATCH v4 02/10] serial: st-asc: Provide RTS functionality Lee Jones <lee.jones@linaro.org> - 2017-02-03 11:30 +0100

csiph-web