Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1571589
| From | Lee Jones <lee.jones@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control |
| Date | 2017-02-01 15:40 +0100 |
| Message-ID | <t64eJ-77f-15@gated-at.bofh.it> (permalink) |
| References | <t64eJ-77f-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hardware flow-control capability must be specified at a platform
level in order to inform the ASC driver that the platform is capable
(i.e. are the lines wired up, etc). STiH4{07,10} devices are indeed
capable, so let's provide the property.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/boot/dts/stih410-b2260.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index cbcbcb4..93c14d1 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -66,6 +66,7 @@
pinctrl-0 = <&pinctrl_serial0_hw_flowctrl>;
pinctrl-1 = <&pinctrl_serial0>;
rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
--
2.9.3
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
[PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control Lee Jones <lee.jones@linaro.org> - 2017-02-01 15:40 +0100 Re: [STLinux Kernel] [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control Peter Griffin <peter.griffin@linaro.org> - 2017-02-01 16:00 +0100
csiph-web