Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1571300
| From | Hoegeun Kwon <hoegeun.kwon@samsung.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v9 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding |
| Date | 2017-02-01 08:50 +0100 |
| Message-ID | <t5XPY-2ZX-9@gated-at.bofh.it> (permalink) |
| References | <t5XPX-2ZX-3@gated-at.bofh.it> <t5XPY-2ZX-11@gated-at.bofh.it> <t5XPX-2ZX-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The Samsung s6e3ha2 is a 5.7" 1440x2560 AMOLED panel connected
using MIPI-DSI interfaces.
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../bindings/display/panel/samsung,s6e3ha2.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
new file mode 100644
index 0000000..18854f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt
@@ -0,0 +1,28 @@
+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+ - compatible: "samsung,s6e3ha2"
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd3-supply: I/O voltage supply
+ - vci-supply: voltage supply for analog circuits
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+ - enable-gpios: a GPIO spec for the panel enable pin (active high)
+
+Optional properties:
+ - te-gpios: a GPIO spec for the tearing effect synchronization signal
+ gpio pin (active high)
+
+Example:
+&dsi {
+ ...
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
--
1.9.1
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
[PATCH v9 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding Hoegeun Kwon <hoegeun.kwon@samsung.com> - 2017-02-01 08:50 +0100 Re: [PATCH v9 1/3] dt-bindings: Add support for samsung s6e3ha2 panel binding Krzysztof Kozlowski <krzk@kernel.org> - 2017-02-01 10:30 +0100
csiph-web