Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1569287
| From | Lukasz Majewski <lukma@denx.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v5 07/11] pwm: imx: Provide atomic PWM support for i.MX PWMv2 |
| Date | 2017-01-29 23:00 +0100 |
| Message-ID | <t55FT-3Wy-5@gated-at.bofh.it> (permalink) |
| References | <t55FT-3Wy-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
This commit provides apply() callback implementation for i.MX's PWMv2.
Suggested-by: Stefan Agner <stefan@agner.ch>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
Changes for v5:
- Modify ->apply() function to avoid unbalanced clock enabling/disabling
- Fix preventing iMX7 from hanging
Changes for v4:
- Avoid recalculation of PWM parameters when disabling PWM signal
- Unconditionally call clk_prepare_enable(imx->clk_per) and
clk_disable_unprepare(imx->clk_per)
Changes for v3:
- Remove ipg clock enable/disable functions
Changes for v2:
- None
---
drivers/pwm/pwm-imx.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 60cdc5c..fdaa11b 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -249,6 +249,73 @@ static int imx_pwm_config(struct pwm_chip *chip,
return ret;
}
+static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ unsigned long period_cycles, duty_cycles, prescale;
+ struct imx_chip *imx = to_imx_chip(chip);
+ struct pwm_state cstate;
+ unsigned long long c;
+ int ret;
+
+ pwm_get_state(pwm, &cstate);
+
+ if (state->enabled) {
+ c = clk_get_rate(imx->clk_per);
+ c *= state->period;
+
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * state->duty_cycle;
+ do_div(c, state->period);
+ duty_cycles = c;
+
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
+ /*
+ * Wait for a free FIFO slot if the PWM is already enabled, and
+ * flush the FIFO if the PWM was disabled and is about to be
+ * enabled.
+ */
+ if (cstate.enabled) {
+ imx_pwm_wait_fifo_slot(chip, pwm);
+ } else if (state->enabled) {
+ ret = clk_prepare_enable(imx->clk_per);
+ if (ret)
+ return ret;
+
+ imx_pwm_sw_reset(chip);
+ }
+
+ writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+ writel(MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH |
+ MX3_PWMCR_EN,
+ imx->mmio_base + MX3_PWMCR);
+
+ } else if (cstate.enabled) {
+ writel(0, imx->mmio_base + MX3_PWMCR);
+
+ clk_disable_unprepare(imx->clk_per);
+ }
+
+ return 0;
+}
+
static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct imx_chip *imx = to_imx_chip(chip);
@@ -280,6 +347,7 @@ static struct pwm_ops imx_pwm_ops_v1 = {
};
static struct pwm_ops imx_pwm_ops_v2 = {
+ .apply = imx_pwm_apply_v2,
.enable = imx_pwm_enable,
.disable = imx_pwm_disable,
.config = imx_pwm_config,
--
2.1.4
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
[PATCH v5 07/11] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Lukasz Majewski <lukma@denx.de> - 2017-01-29 23:00 +0100
Re: [PATCH v5 07/11] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-01-30 09:00 +0100
Re: [PATCH v5 07/11] pwm: imx: Provide atomic PWM support for i.MX PWMv2 Thierry Reding <thierry.reding@gmail.com> - 2017-01-30 09:10 +0100
csiph-web