Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1568701

Re: [PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Hi Florian,

On Fri, Jan 27, 2017 at 11:37:27AM +0100, Florian Vaussard wrote:
> Hi Maxime,
> 
> On 01/26/2017 10:05 AM, Maxime Ripard wrote:
> > Hi,
> > 
> > Here is a new attempt at getting the MMC controllers running, following the
> > work done by Andre.
> > 
> > This has been tested on a board with one SDIO device (a Marvell WiFi chip)
> > and a Kingston eMMC with 1.8V IOs.
> > 
> > For SDIO, the HS DDR mode works just fine. That serie also enables the
> > SDR104 mode to work on the devices that are capable of this.
> > 
> > For the eMMC, HS200 with the voltage switch works. HS400 doesn't at the
> > moment, but since it's significantly more complex, and at the same time
> > Allwinner recommends to limit its frequency to 100MHz, this doesn't have
> > any benefits. If there's any at some point, this can be added later.
> > 
> > Let me know what you think,
> > Maxime
> > 
> 
> FWIW I tested this series and got decent throughput (190 Mbps in UDP) with a
> Marvell SDIO Wifi chip. The board becomes unresponsive between 30 to 60 minutes
> of iperf torture, but I strongly suspect a hardware issue underneath. Feel free
> to add my Tested-by on the MMC patches if you need it.

Thanks for testing!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:10 +0100
  [PATCH v4 2/13] mmc: sunxi: Gate the clock when rate is 0 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:10 +0100
  [PATCH v4 3/13] mmc: sunxi: Always set signal delay to 0 for A64 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:10 +0100
  [PATCH v4 12/13] arm64: allwinner: a64: add UART1 pin nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:20 +0100
  [PATCH v4 10/13] arm64: allwinner: a64: Increase the MMC max frequency Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:20 +0100
    Re: [PATCH v4 10/13] arm64: allwinner: a64: Increase the MMC max  frequency Florian Vaussard <florian.vaussard@heig-vd.ch> - 2017-01-27 11:50 +0100
      Re: [PATCH v4 10/13] arm64: allwinner: a64: Increase the MMC max  frequency Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-27 22:40 +0100
  [PATCH v4 1/13] mmc: sunxi: Fix clock frequency change sequence Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:20 +0100
  [PATCH v4 11/13] arm64: allwinner: pine64: add MMC support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-26 10:20 +0100
  Re: [PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support Florian Vaussard <florian.vaussard@heig-vd.ch> - 2017-01-27 11:50 +0100
    Re: [PATCH v4 0/13] arm64: allwinner: a64: Enable MMC support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-27 22:40 +0100

csiph-web