Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1564276

Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock

From Chunfeng Yun <chunfeng.yun@mediatek.com>
Newsgroups linux.kernel
Subject Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock
Date 2017-01-22 03:00 +0100
Message-ID <t2fBM-2Nm-7@gated-at.bofh.it> (permalink)
References <t0RBv-oA-5@gated-at.bofh.it> <t0RBv-oA-7@gated-at.bofh.it> <t2asp-8mt-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Hi,

On Sat, 2017-01-21 at 14:11 -0600, Rob Herring wrote:
> On Wed, Jan 18, 2017 at 02:08:27PM +0800, Chunfeng Yun wrote:
> > add a reference clock for compatibility
> 
> Why? This block suddenly has 2 clocks instead of 1?
In fact, there is a reference clock which comes from 26M oscillator
directly. I ignore it because it is a fixed-clock in DTS, and always
turned on for mt8173. But later, I find that I made a mistake before
when I bring up it on a new platform whose reference clock comes from
PLL, and need control it. So here add it, no matter it is a fixed-clock
or not.

> 
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> >  .../devicetree/bindings/usb/mt8173-mtu3.txt        |   10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> > index e049d19..8c976cd 100644
> > --- a/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> > +++ b/Documentation/devicetree/bindings/usb/mt8173-mtu3.txt
> > @@ -10,7 +10,7 @@ Required properties:
> >   - vusb33-supply : regulator of USB avdd3.3v
> >   - clocks : a list of phandle + clock-specifier pairs, one for each
> >  	entry in clock-names
> > - - clock-names : must contain "sys_ck" for clock of controller;
> > + - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
> >  	"wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
> >  	depends on "mediatek,enable-wakeup"
> >   - phys : a list of phandle + phy specifier pairs
> > @@ -56,10 +56,10 @@ ssusb: usb@11271000 {
> >  	phys = <&phy_port0 PHY_TYPE_USB3>,
> >  	       <&phy_port1 PHY_TYPE_USB2>;
> >  	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> > -	clocks = <&topckgen CLK_TOP_USB30_SEL>,
> > +	clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
> >  		 <&pericfg CLK_PERI_USB0>,
> >  		 <&pericfg CLK_PERI_USB1>;
> > -	clock-names = "sys_ck",
> > +	clock-names = "sys_ck", "ref_ck",
> >  		      "wakeup_deb_p0",
> >  		      "wakeup_deb_p1";
> >  	vusb33-supply = <&mt6397_vusb_reg>;
> > @@ -79,8 +79,8 @@ ssusb: usb@11271000 {
> >  		reg-names = "mac";
> >  		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> >  		power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
> > -		clocks = <&topckgen CLK_TOP_USB30_SEL>;
> > -		clock-names = "sys_ck";
> > +		clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
> > +		clock-names = "sys_ck", "ref_ck";
> >  		vusb33-supply = <&mt6397_vusb_reg>;
> >  		status = "disabled";
> >  	};
> > -- 
> > 1.7.9.5
> > 

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH 1/6] usb: mtu3: get resources that cause deferred probe earlier Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:10 +0100
  [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:10 +0100
    Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock Rob Herring <robh@kernel.org> - 2017-01-21 21:30 +0100
      Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-22 03:00 +0100
        Re: [PATCH 6/6] dt-bindings: mt8173-mtu3: add reference clock Rob Herring <robh@kernel.org> - 2017-01-23 15:10 +0100
  [PATCH 4/6] arm64: dts: mt8173: add reference clock for usb Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:10 +0100
    Re: [PATCH 4/6] arm64: dts: mt8173: add reference clock for usb Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-01-19 11:00 +0100
      Re: [PATCH 4/6] arm64: dts: mt8173: add reference clock for usb Matthias Brugger <matthias.bgg@gmail.com> - 2017-01-19 13:30 +0100
  [PATCH 5/6] dt-bindings: mt8173-xhci: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:10 +0100
    Re: [PATCH 5/6] dt-bindings: mt8173-xhci: add reference clock Rob Herring <robh@kernel.org> - 2017-01-21 21:20 +0100
      Re: [PATCH 5/6] dt-bindings: mt8173-xhci: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-22 03:00 +0100
    Re: [PATCH 5/6] dt-bindings: mt8173-xhci: add reference clock Rob Herring <robh@kernel.org> - 2017-01-21 21:20 +0100
  [PATCH 2/6] usb: mtu3: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:20 +0100
    Re: [PATCH 2/6] usb: mtu3: add reference clock Matthias Brugger <matthias.bgg@gmail.com> - 2017-01-19 13:30 +0100
      Re: [PATCH 2/6] usb: mtu3: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-20 03:30 +0100
        Re: [PATCH 2/6] usb: mtu3: add reference clock Matthias Brugger <matthias.bgg@gmail.com> - 2017-01-25 00:30 +0100
  [PATCH 3/6] usb: xhci-mtk: add reference clock Chunfeng Yun <chunfeng.yun@mediatek.com> - 2017-01-18 07:20 +0100

csiph-web