Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1562283
| From | Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] [media] ov9650: use msleep() for uncritical long delay |
| Date | 2017-01-19 00:30 +0100 |
| Message-ID | <t17PY-26r-15@gated-at.bofh.it> (permalink) |
| References | <t0fZf-186-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Nicholas,
Thank you for the patch.
On Monday 16 Jan 2017 14:58:33 Nicholas Mc Guire wrote:
> ulseep_range() uses hrtimers and provides no advantage over msleep()
> for larger delays. Fix up the 25ms delays here to use msleep() and
> reduce the load on the hrtimer subsystem.
>
> Link: http://lkml.org/lkml/2017/1/11/377
> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
and applied to my tree. I'll send a pull request for v4.11.
> ---
> Problem found by coccinelle script
>
> Patch was compile tested with: x86_64_defconfig + CONFIG_MEDIA_SUPPORT=m
> CONFIG_MEDIA_ANALOG_TV_SUPPORT=y, CONFIG_MEDIA_CONTROLLER=y
> CONFIG_VIDEO_V4L2_SUBDEV_API=y, CONFIG_MEDIA_SUBDRV_AUTOSELECT=n
> CONFIG_VIDEO_OV9650=m
>
> Patch is aginast 4.10-rc3 (localversion-next is next-20170116)
>
> drivers/media/i2c/ov9650.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/ov9650.c b/drivers/media/i2c/ov9650.c
> index 502c722..2de2fbb 100644
> --- a/drivers/media/i2c/ov9650.c
> +++ b/drivers/media/i2c/ov9650.c
> @@ -522,7 +522,7 @@ static void __ov965x_set_power(struct ov965x *ov965x,
> int on) if (on) {
> ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 0);
> ov965x_gpio_set(ov965x->gpios[GPIO_RST], 0);
> - usleep_range(25000, 26000);
> + msleep(25);
> } else {
> ov965x_gpio_set(ov965x->gpios[GPIO_RST], 1);
> ov965x_gpio_set(ov965x->gpios[GPIO_PWDN], 1);
> @@ -1438,7 +1438,7 @@ static int ov965x_detect_sensor(struct v4l2_subdev
> *sd)
>
> mutex_lock(&ov965x->lock);
> __ov965x_set_power(ov965x, 1);
> - usleep_range(25000, 26000);
> + msleep(25);
>
> /* Check sensor revision */
> ret = ov965x_read(client, REG_PID, &pid);
--
Regards,
Laurent Pinchart
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH] [media] ov9650: use msleep() for uncritical long delay Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2017-01-19 00:30 +0100
csiph-web