Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1560616

[PATCH v2 03/10] dt-bindings: sound: Add new reset compatible for sun4i-i2s

Show all headers | View raw

Add a new compatible for sun4i-i2s driver to handle some
SoCs that have a reset line that must be asserted/deasserted.

This new compatible, "allwinner,sun6i-a31-i2s", requires two
properties:
	- resets: phandle to the reset line
	- reset-names: the name of the reset line ("rst").
Except these differences, the compatible is identical to previous one
which will not handle a reset line.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
---
 .../devicetree/bindings/sound/sun4i-i2s.txt        | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 7a2c0945fd22..f673206e309b 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -7,6 +7,7 @@ Required properties:
 
 - compatible: should be one of the following:
    - "allwinner,sun4i-a10-i2s"
+   - "allwinner,sun6i-a31-i2s" for controller with reset lines
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: should contain the I2S interrupt.
@@ -19,7 +20,13 @@ Required properties:
    - "mod" : module clock for the I2S controller
 - #sound-dai-cells : Must be equal to 0
 
+Required properties for the following compatibles:
+		- "allwinner,sun6i-a31-i2s"
+- resets: phandle to the reset line for this codec
+- reset-names: Contains the reset signal name "rst"
+
 Example:
+For "allwinner,sun4i-a10-i2s":
 
 i2s0: i2s@01c22400 {
 	#sound-dai-cells = <0>;
@@ -32,3 +39,19 @@ i2s0: i2s@01c22400 {
 	       <&dma SUN4I_DMA_NORMAL 3>;
 	dma-names = "rx", "tx";
 };
+
+For "allwinner,sun6i-a31-i2s":
+
+dai: dai@01c22c00 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun6i-a31-i2s";
+	reg = <0x01c22c00 0x200>;
+	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+	clock-names = "apb", "mod";
+	resets = <&ccu RST_BUS_CODEC>;
+	reset-names = "rst";
+	dmas = <&dma 15>, /* AUDIO_CODEC port */
+		<&dma 15>; /* AUDIO_CODEC port */
+	dma-names = "rx", "tx";
+};
-- 
2.11.0

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 00/10] Add sun8i A33 audio driver Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
  [PATCH v2 08/10] ARM: dts: sun8i: Add audio codec, dai and card for A33 Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
    Re: [PATCH v2 08/10] ARM: dts: sun8i: Add audio codec, dai and card  for A33 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-17 18:00 +0100
  [PATCH v2 07/10] dt-bindings: sound: Add sun8i audio documentation Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
    Re: [PATCH v2 07/10] dt-bindings: sound: Add sun8i audio  documentation Mark Brown <broonie@kernel.org> - 2017-01-17 18:00 +0100
      Re: [PATCH v2 07/10] dt-bindings: sound: Add sun8i audio  documentation Mylene Josserand <mylene.josserand@free-electrons.com> - 2017-01-18 09:30 +0100
    Re: [PATCH v2 07/10] dt-bindings: sound: Add sun8i audio  documentation Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-17 18:00 +0100
  [PATCH v2 09/10] ARM: dts: sun8i: parrot: Enable audio nodes Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
  [PATCH v2 03/10] dt-bindings: sound: Add new reset compatible for sun4i-i2s Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
    Re: [PATCH v2 03/10] dt-bindings: sound: Add new reset compatible  for sun4i-i2s Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-17 17:50 +0100
      Re: [PATCH v2 03/10] dt-bindings: sound: Add new reset compatible for  sun4i-i2s Mylene Josserand <mylene.josserand@free-electrons.com> - 2017-01-18 09:30 +0100
  [PATCH v2 02/10] clk: ccu-sun8i-a33: Add CLK_SET_RATE_PARENT to ac-dig Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
    Re: [PATCH v2 02/10] clk: ccu-sun8i-a33: Add CLK_SET_RATE_PARENT to  ac-dig Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-17 18:00 +0100
      Re: [PATCH v2 02/10] clk: ccu-sun8i-a33: Add CLK_SET_RATE_PARENT to  ac-dig Mylene Josserand <mylene.josserand@free-electrons.com> - 2017-01-18 09:00 +0100
  [PATCH v2 04/10] ASoC: sun4i-i2s: Add quirks to handle new compatible for reset Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100
    Re: [PATCH v2 04/10] ASoC: sun4i-i2s: Add quirks to handle new  compatible for reset Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-17 17:50 +0100
  [PATCH v2 10/10] ARM: dts: sun8i: sinlinx: Enable audio nodes Mylène Josserand          <mylene.josserand@free-electrons.com> - 2017-01-17 15:10 +0100

csiph-web