Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1513990

[PATCH v5 0/7] add NS2 support to bgmac

From Jon Mason <jon.mason@broadcom.com>
Newsgroups linux.kernel
Subject [PATCH v5 0/7] add NS2 support to bgmac
Date 2016-11-02 18:10 +0100
Message-ID <sz7cZ-FB-27@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


Changes in v5:
* Change a pr_err to netdev_err (per Scott Branden)
* Reword the lane swap binding documentation (per Andrew Lunn)


Changes in v4:
* Actually send out the lane swap binding doc patch (Per Scott Branden)
* Remove unused #define (Per Andrew Lunn)


Changes in v3:
* Clean-up the bgmac DT binding doc (per Rob Herring)
* Document the lane swap binding and make it generic (Per Andrew Lunn)


Changes in v2:
* Remove the PHY power-on (per Andrew Lunn)
* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn)
  This results on none of the original PHY code from Vikas being
  present.  So, I'm removing him as an author and giving him
  "Inspired-by" credit.
* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian
  Fainelli)
* Remove bgmac sleep (per Florian Fainelli)
* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui)
* Rebased on latest net-next
* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810


Add support for the amac found in the Broadcom Northstar2 SoC to the
bgmac driver.  This necessitates adding support to connect to an
externally defined phy (as described in the device tree) in the driver.
These phy changes are in addition to the changes necessary to get NS2
working.


Jon Mason (7):
  net: phy: broadcom: add bcm54xx_auxctl_read
  Documentation: devicetree: add PHY lane swap binding
  net: phy: broadcom: Add BCM54810 PHY entry
  Documentation: devicetree: net: add NS2 bindings to amac
  net: ethernet: bgmac: device tree phy enablement
  net: ethernet: bgmac: add NS2 support
  arm64: dts: NS2: add AMAC ethernet support

 .../devicetree/bindings/net/brcm,amac.txt          |  16 ++--
 Documentation/devicetree/bindings/net/phy.txt      |   4 +
 arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   5 ++
 arch/arm64/boot/dts/broadcom/ns2.dtsi              |  12 +++
 drivers/net/ethernet/broadcom/bgmac-bcma.c         |  48 ++++++++++
 drivers/net/ethernet/broadcom/bgmac-platform.c     | 100 ++++++++++++++++++++-
 drivers/net/ethernet/broadcom/bgmac.c              |  55 ++----------
 drivers/net/ethernet/broadcom/bgmac.h              |   8 ++
 drivers/net/phy/Kconfig                            |   2 +-
 drivers/net/phy/broadcom.c                         |  68 +++++++++++++-
 include/linux/brcmphy.h                            |  10 +++
 11 files changed, 271 insertions(+), 57 deletions(-)

-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread


Thread

[PATCH v5 0/7] add NS2 support to bgmac Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:10 +0100
  [PATCH v5 1/7] net: phy: broadcom: add bcm54xx_auxctl_read Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:10 +0100
    Re: [PATCH v5 1/7] net: phy: broadcom: add bcm54xx_auxctl_read Florian Fainelli <florian.fainelli@broadcom.com> - 2016-11-02 18:20 +0100
  Re: [PATCH v5 3/7] net: phy: broadcom: Add BCM54810 PHY entry Florian Fainelli <florian.fainelli@broadcom.com> - 2016-11-02 18:20 +0100
  [PATCH v5 3/7] net: phy: broadcom: Add BCM54810 PHY entry Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:20 +0100
    Re: [PATCH v5 3/7] net: phy: broadcom: Add BCM54810 PHY entry Andrew Lunn <andrew@lunn.ch> - 2016-11-02 19:40 +0100
  Re: [PATCH v5 4/7] Documentation: devicetree: net: add NS2 bindings  to amac Florian Fainelli <f.fainelli@gmail.com> - 2016-11-02 18:20 +0100
  [PATCH v5 4/7] Documentation: devicetree: net: add NS2 bindings to amac Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:20 +0100
    Re: [PATCH v5 4/7] Documentation: devicetree: net: add NS2 bindings  to amac Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-11-02 18:20 +0100
      Re: [PATCH v5 4/7] Documentation: devicetree: net: add NS2 bindings  to amac Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:30 +0100
        Re: [PATCH v5 4/7] Documentation: devicetree: net: add NS2 bindings  to amac Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2016-11-02 21:00 +0100
  [PATCH v5 5/7] net: ethernet: bgmac: device tree phy enablement Jon Mason <jon.mason@broadcom.com> - 2016-11-02 18:20 +0100
    Re: [PATCH v5 5/7] net: ethernet: bgmac: device tree phy enablement Rafal Milecki <rafal@milecki.pl> - 2016-11-03 09:50 +0100
      Re: [PATCH v5 5/7] net: ethernet: bgmac: device tree phy enablement Jon Mason <jon.mason@broadcom.com> - 2016-11-03 17:50 +0100
  Re: [PATCH v5 0/7] add NS2 support to bgmac David Miller <davem@davemloft.net> - 2016-11-03 21:10 +0100

csiph-web