[PATCH 1/2] dmaengine: dma_slave_config: add support for slave port window

Path	csiph.com!news.mixmin.net!aioe.org!bofh.it!news.nic.it!robomod
From	Peter Ujfalusi <peter.ujfalusi@ti.com>
Newsgroups	linux.kernel
Subject	[PATCH 1/2] dmaengine: dma_slave_config: add support for slave port window
Date	Tue, 25 Oct 2016 13:00:02 +0200
Message-ID	<sw7Cy-4uH-35@gated-at.bofh.it> (permalink)
References	<sw7Cx-4uH-11@gated-at.bofh.it>
X-Original-To	<vinod.koul@intel.com>, <dan.j.williams@intel.com>, Tony Lindgren <tony@atomide.com>, Russell King - ARM Linux <linux@armlinux.org.uk>
X-Mailer	git-send-email 2.10.1
MIME-Version	1.0
Content-Type	text/plain
Sender	robomod@news.nic.it
List-ID	<linux-kernel.vger.kernel.org>
X-Mailing-List	linux-kernel@vger.kernel.org
Approved	robomod@news.nic.it
Lines	38
Organization	linux.* mail to news gateway
X-Original-Cc	<dmaengine@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, <arnd@arndb.de>
X-Original-Date	Tue, 25 Oct 2016 13:50:18 +0300
X-Original-Message-ID	<20161025105019.24475-2-peter.ujfalusi@ti.com>
X-Original-References	<20161025105019.24475-1-peter.ujfalusi@ti.com>
X-Original-Sender	linux-kernel-owner@vger.kernel.org
Xref	csiph.com linux.kernel:1508205

Show key headers only | View raw

Some slave devices uses address window instead of single register for read
and/or write of data. With the src/dst_port_window_size the address window
can be specified and the DMAengine driver should use this information to
correctly set up the transfer to loop within the provided window.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 include/linux/dmaengine.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index cc535a478bae..689d44327ef3 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -336,6 +336,12 @@ enum dma_slave_buswidth {
  * may or may not be applicable on memory sources.
  * @dst_maxburst: same as src_maxburst but for destination target
  * mutatis mutandis.
+ * @src_port_window_size: The length of the register area the data need to be
+ * written on the device side. It is only used for devices which is using an
+ * area instead of a single register to receive the data. Typically the DMA
+ * loops in this area in order to transfer the data.
+ * @dst_port_window_size: same as src_port_window_size but for the destination
+ * port.
  * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill
  * with 'true' if peripheral should be flow controller. Direction will be
  * selected at Runtime.
@@ -363,6 +369,8 @@ struct dma_slave_config {
 	enum dma_slave_buswidth dst_addr_width;
 	u32 src_maxburst;
 	u32 dst_maxburst;
+	u32 src_port_window_size;
+	u32 dst_port_window_size;
 	bool device_fc;
 	unsigned int slave_id;
 };
-- 
2.10.1

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 0/2] dmaengine: core/omap-dma: Support for port window Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-10-25 13:00 +0200
  [PATCH 2/2] dmaengine: omap-dma: Support for slave devices with data port window Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-10-25 13:00 +0200
  [PATCH 1/2] dmaengine: dma_slave_config: add support for slave port window Peter Ujfalusi <peter.ujfalusi@ti.com> - 2016-10-25 13:00 +0200

csiph-web