Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1505222

[PATCH 2/4] Input: goodix - Allow tweaking of configuration file dynamically

From Franklin S Cooper Jr <fcooper@ti.com>
Newsgroups linux.kernel
Subject [PATCH 2/4] Input: goodix - Allow tweaking of configuration file dynamically
Date 2016-10-20 22:10 +0200
Message-ID <surP3-3PX-19@gated-at.bofh.it> (permalink)
References <surP3-3PX-11@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Some goodix touchscreen controllers don't have the correct configuration
firmware for the display panel it is attached to. Therefore, settings such
as touchscreen x and y size may need to be passed in via DT and have the
panel reprogrammed for the updated touchscreen resolution.

This patchset adds support for reading the current configuration firmware
on the panel and allowing it to be modified and rewritten back to the
device.

Currently this function is unused but later patches will make use of it.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 drivers/input/touchscreen/goodix.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index a43c8ca..01e12f8 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -478,6 +478,34 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 	return 0;
 }
 
+static void goodix_tweak_config(struct goodix_ts_data *ts)
+{
+	u8 config[GOODIX_CONFIG_MAX_LENGTH];
+	int error;
+	int raw_cfg_len;
+	u8 check_sum = 0;
+
+	raw_cfg_len = ts->cfg_len - 2;
+
+	error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
+				config, ts->cfg_len);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			 "Error reading config (%d), avoid tweaking config\n",
+			 error);
+		return;
+	}
+
+	check_sum = goodix_calculate_checksum(ts->cfg_len, config);
+
+	config[raw_cfg_len] = check_sum;
+	config[raw_cfg_len + 1] = 1;
+
+	error = goodix_send_cfg(ts, ts->cfg_len, config);
+	if (error)
+		dev_warn(&ts->client->dev,
+			 "Error writing config (%d)\n", error);
+}
 /**
  * goodix_read_config - Read the embedded configuration of the panel
  *
-- 
2.10.0

Back to linux.kernel | Previous | NextPrevious in thread | Find similar | Unroll thread


Thread

[PATCH 0/4] Input: goodix - Support dynamic reconfiguration Franklin S Cooper Jr <fcooper@ti.com> - 2016-10-20 22:10 +0200
  [PATCH 3/4] Input: goodix - Tweak configuration to use passed in touchscreen resolution Franklin S Cooper Jr <fcooper@ti.com> - 2016-10-20 22:10 +0200
    Re: [PATCH 3/4] Input: goodix - Tweak configuration to use passed in  touchscreen resolution Rob Herring <robh@kernel.org> - 2016-10-27 01:20 +0200
  [PATCH 4/4] Input: goodix - Support interchanging x and y coordinates in hardware Franklin S Cooper Jr <fcooper@ti.com> - 2016-10-20 22:10 +0200
    Re: [PATCH 4/4] Input: goodix - Support interchanging x and y  coordinates in hardware Rob Herring <robh@kernel.org> - 2016-10-27 01:20 +0200
  [PATCH 2/4] Input: goodix - Allow tweaking of configuration file dynamically Franklin S Cooper Jr <fcooper@ti.com> - 2016-10-20 22:10 +0200

csiph-web