Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1503729
| From | Ulf Hansson <ulf.hansson@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [RFC 2/2] mmc: sdhci: Ignore capability register when it comes to speeds and use DT binding instead when sdhci-cap-speed-modes-broken is set. |
| Date | 2016-10-19 16:40 +0200 |
| Message-ID | <su0cb-2v4-115@gated-at.bofh.it> (permalink) |
| References | <stJO2-7sS-5@gated-at.bofh.it> <stJO2-7sS-17@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 18 October 2016 at 23:05, Zach Brown <zach.brown@ni.com> wrote:
> When the sdhci-cap-speed-modes-broken DT property is set, the driver
> will ignore the bits of the capability registers that correspond to
> speed modes and will read the of properties of the device to determine
> which speeds are supported.
To me this seems like a great idea. Yeah, I proposed it so I guess
that's why. :-)
Anyway, it's Adrian call to decide how he want to go with this. He
might consider the other option [1] to be better.
Some more comments below.
>
> Signed-off-by: Zach Brown <zach.brown@ni.com>
> ---
> drivers/mmc/host/sdhci.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 1e25b01..100649a 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -22,6 +22,7 @@
> #include <linux/scatterlist.h>
> #include <linux/regulator/consumer.h>
> #include <linux/pm_runtime.h>
> +#include <linux/of.h>
>
> #include <linux/leds.h>
>
> @@ -3020,6 +3021,32 @@ void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, u32 *caps1)
> }
> EXPORT_SYMBOL_GPL(__sdhci_read_caps);
>
> +void sdhci_get_speed_caps_from_of(struct sdhci_host *host)
> +{
> + struct mmc_host *mmc = host->mmc;
> +
> + host->caps &= ~SDHCI_CAN_DO_HISPD;
> +
> + if (of_property_read_bool(mmc_dev(mmc)->of_node, "cap-sd-highspeed"))
> + host->caps |= SDHCI_CAN_DO_HISPD;
> +
> + if (host->version < SDHCI_SPEC_300)
> + return;
> +
> + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
> + SDHCI_SUPPORT_DDR50);
> +
> + if (of_property_read_bool(mmc_dev(mmc)->of_node, "sd-uhs-sdr50"))
> + host->caps1 |= SDHCI_SUPPORT_SDR50;
> +
> + if (of_property_read_bool(mmc_dev(mmc)->of_node, "sd-uhs-sdr104"))
> + host->caps1 |= SDHCI_SUPPORT_SDR104;
> +
> + if (of_property_read_bool(mmc_dev(mmc)->of_node, "sd-uhs-ddr50"))
> + host->caps1 |= SDHCI_SUPPORT_DDR50;
> +
I don't think you need a separate OF parsing function. Instead the
SDHCI variant drivers may call mmc_of_parse() to parse the generic mmc
OF properties and then read the SDHCI caps registers (in some way or
the other).
As reading the SDHCI caps registers is done in __sdhci_read_caps(),
you could instead check for the OF property
"sdhci-cap-speed-modes-broken" in there, and if it's set, clear the
related bits. I think that's all you need.
Note, the above code considers only SD speed modes, I assume we should
include eMMC speed modes to be broken as well!?
> +}
> +
> int sdhci_setup_host(struct sdhci_host *host)
> {
> struct mmc_host *mmc;
> @@ -3046,6 +3073,10 @@ int sdhci_setup_host(struct sdhci_host *host)
> return ret;
>
> sdhci_read_caps(host);
> + if (of_property_read_bool(mmc_dev(mmc)->of_node,
> + "sdhci-cap-speed-modes-broken"))
> + sdhci_get_speed_caps_from_of(host);
> +
>
> override_timeout_clk = host->timeout_clk;
>
> --
> 2.7.4
>
Kind regards
Uffe
[1]
http://www.spinics.net/lists/devicetree/msg146401.html
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[RFC 0/2] Ignore capability registers when it comes to speeds and use DT binding instead. Zach Brown <zach.brown@ni.com> - 2016-10-18 23:10 +0200
[RFC 1/2] mmc: sdhci: dt: Add device tree property sdhci-cap-speed-modes-broken Zach Brown <zach.brown@ni.com> - 2016-10-18 23:10 +0200
Re: [RFC 1/2] mmc: sdhci: dt: Add device tree property sdhci-cap-speed-modes-broken Rob Herring <robh@kernel.org> - 2016-10-26 23:10 +0200
[RFC 2/2] mmc: sdhci: Ignore capability register when it comes to speeds and use DT binding instead when sdhci-cap-speed-modes-broken is set. Zach Brown <zach.brown@ni.com> - 2016-10-18 23:10 +0200
Re: [RFC 2/2] mmc: sdhci: Ignore capability register when it comes to speeds and use DT binding instead when sdhci-cap-speed-modes-broken is set. Ulf Hansson <ulf.hansson@linaro.org> - 2016-10-19 16:40 +0200
csiph-web