Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1503827

[PATCH 1/7] clk: qcom: Mark a few branch clocks with BRANCH_HALT_DELAY

Show all headers | View raw

We seem to have a few branch clocks within gcc for msm8996 which do
have a valid halt bit but can't be used to check branch enable/disable
status as they rely on external clocks in some cases and in some 
others only toggle during an ongoing bus transaction.
Mark these with BRANCH_HALT_DELAY, so we just add a delay instead.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/clk/qcom/gcc-msm8996.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index fe03e6f..4e78924 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -1388,7 +1388,7 @@ enum {
 };
 
 static struct clk_branch gcc_usb3_phy_pipe_clk = {
-	.halt_reg = 0x50004,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x50004,
 		.enable_mask = BIT(0),
@@ -2442,7 +2442,7 @@ enum {
 };
 
 static struct clk_branch gcc_pcie_0_pipe_clk = {
-	.halt_reg = 0x6b018,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x6b018,
 		.enable_mask = BIT(0),
@@ -2517,7 +2517,7 @@ enum {
 };
 
 static struct clk_branch gcc_pcie_1_pipe_clk = {
-	.halt_reg = 0x6d018,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x6d018,
 		.enable_mask = BIT(0),
@@ -2592,7 +2592,7 @@ enum {
 };
 
 static struct clk_branch gcc_pcie_2_pipe_clk = {
-	.halt_reg = 0x6e018,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x6e018,
 		.enable_mask = BIT(0),
@@ -2721,7 +2721,7 @@ enum {
 };
 
 static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
-	.halt_reg = 0x75018,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x75018,
 		.enable_mask = BIT(0),
@@ -2736,7 +2736,7 @@ enum {
 };
 
 static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
-	.halt_reg = 0x7501c,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x7501c,
 		.enable_mask = BIT(0),
@@ -2751,7 +2751,7 @@ enum {
 };
 
 static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
-	.halt_reg = 0x75020,
+	.halt_check = BRANCH_HALT_DELAY,
 	.clkr = {
 		.enable_reg = 0x75020,
 		.enable_mask = BIT(0),
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 1/7] clk: qcom: Mark a few branch clocks with BRANCH_HALT_DELAY Rajendra Nayak <rnayak@codeaurora.org> - 2016-10-19 17:10 +0200

csiph-web