Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1502283

Re: [PATCH] sd: assign appropriate log level

Show all headers | View raw

On Mon, 2016-10-17 at 09:51 -0700, David Singleton wrote:
> From: Shikhar Dogra <shidogra@cisco.com>
> 
> Reduce chatter on console for usb hotplug.
> KERN_ERR is too high severity for these messages, moving them
> to KERN_WARNING

It's an error because we have several USB to IDE bridges that have
write back cache drives but report nothing to the caching mode page. 
 For them this is a serious error because their data integrity is at
risk.  I'm open to other ways to fix your problem, but downgrading the
message severity because *you* don't have an issue would mask the
problem for others, so it's not really viable.

> USB devices never have a Caching Mode page, it doesn't make
> sense to make it an error when you have tons of USB devices where
> the print is useless, and not an error.
> 
> For second message, the condition is not an error. The existing
> workaround of assuming a write through cache doesn't limit
> functionality in any way.

Yes, it does if the cache is actually write back ...

James


> Cc: xe-kernel@external.cisco.com
> Signed-off-by: Shikhar Dogra <shidogra@cisco.com>
> Signed-off-by: David Singleton <davsingl@cisco.com>
> ---
>  drivers/scsi/sd.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
> index 51e5629..ab7bfe3 100644
> --- a/drivers/scsi/sd.c
> +++ b/drivers/scsi/sd.c
> @@ -2540,7 +2540,7 @@ sd_read_cache_type(struct scsi_disk *sdkp,
> unsigned char *buffer)
>  			}
>  		}
>  
> -		sd_first_printk(KERN_ERR, sdkp, "No Caching mode
> page found\n");
> +		sd_first_printk(KERN_WARNING, sdkp, "No Caching mode
> page found\n");
>  		goto defaults;
>  
>  	Page_found:
> @@ -2594,7 +2594,7 @@ sd_read_cache_type(struct scsi_disk *sdkp,
> unsigned char *buffer)
>  				"Assuming drive cache: write
> back\n");
>  		sdkp->WCE = 1;
>  	} else {
> -		sd_first_printk(KERN_ERR, sdkp,
> +		sd_first_printk(KERN_WARNING, sdkp,
>  				"Assuming drive cache: write
> through\n");
>  		sdkp->WCE = 0;
>  	}

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] sd: assign appropriate log level David Singleton <davsingl@cisco.com> - 2016-10-17 19:10 +0200
  Re: [PATCH] sd: assign appropriate log level Joe Perches <joe@perches.com> - 2016-10-17 19:20 +0200
  Re: [PATCH] sd: assign appropriate log level James Bottomley <jejb@linux.vnet.ibm.com> - 2016-10-17 19:20 +0200
    Re: [PATCH] sd: assign appropriate log level Daniel Walker <danielwa@cisco.com> - 2016-10-17 19:40 +0200

csiph-web