Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1503001
| From | Denis Kirjanov <kda@linux-powerpc.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking |
| Date | 2016-10-18 15:50 +0200 |
| Message-ID | <stCWe-2lM-45@gated-at.bofh.it> (permalink) |
| References | <stmeJ-7YZ-3@gated-at.bofh.it> <stmeJ-7YZ-15@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 10/17/16, Jarod Wilson <jarod@redhat.com> wrote:
> dl2k: min_mtu 68, max_mtu 1536 or 8000, depending on hardware
> - Removed change_mtu, does nothing productive anymore
>
> sundance: min_mtu 68, max_mtu 8191
>
> CC: netdev@vger.kernel.org
> CC: Denis Kirjanov <kda@linux-powerpc.org>
> Signed-off-by: Jarod Wilson <jarod@redhat.com>
> ---
> drivers/net/ethernet/dlink/dl2k.c | 22 ++++------------------
> drivers/net/ethernet/dlink/sundance.c | 6 ++++--
> 2 files changed, 8 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/net/ethernet/dlink/dl2k.c
> b/drivers/net/ethernet/dlink/dl2k.c
> index 78f1446..8c95a8a 100644
> --- a/drivers/net/ethernet/dlink/dl2k.c
> +++ b/drivers/net/ethernet/dlink/dl2k.c
> @@ -76,7 +76,6 @@ static void rio_free_tx (struct net_device *dev, int
> irq);
> static void tx_error (struct net_device *dev, int tx_status);
> static int receive_packet (struct net_device *dev);
> static void rio_error (struct net_device *dev, int int_status);
> -static int change_mtu (struct net_device *dev, int new_mtu);
> static void set_multicast (struct net_device *dev);
> static struct net_device_stats *get_stats (struct net_device *dev);
> static int clear_stats (struct net_device *dev);
> @@ -106,7 +105,6 @@ static const struct net_device_ops netdev_ops = {
> .ndo_set_rx_mode = set_multicast,
> .ndo_do_ioctl = rio_ioctl,
> .ndo_tx_timeout = rio_tx_timeout,
> - .ndo_change_mtu = change_mtu,
> };
>
> static int
> @@ -230,6 +228,10 @@ rio_probe1 (struct pci_dev *pdev, const struct
> pci_device_id *ent)
> #if 0
> dev->features = NETIF_F_IP_CSUM;
> #endif
> + /* MTU range: 68 - 1536 or 8000 */
> + dev->min_mtu = ETH_MIN_MTU;
> + dev->max_mtu = np->jumbo ? MAX_JUMBO : PACKET_SIZE;
> +
> pci_set_drvdata (pdev, dev);
>
> ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma);
> @@ -1198,22 +1200,6 @@ clear_stats (struct net_device *dev)
> return 0;
> }
>
> -
> -static int
> -change_mtu (struct net_device *dev, int new_mtu)
> -{
> - struct netdev_private *np = netdev_priv(dev);
> - int max = (np->jumbo) ? MAX_JUMBO : 1536;
> -
> - if ((new_mtu < 68) || (new_mtu > max)) {
> - return -EINVAL;
> - }
> -
> - dev->mtu = new_mtu;
> -
> - return 0;
> -}
> -
> static void
> set_multicast (struct net_device *dev)
> {
> diff --git a/drivers/net/ethernet/dlink/sundance.c
> b/drivers/net/ethernet/dlink/sundance.c
> index 79d8009..eab36ac 100644
> --- a/drivers/net/ethernet/dlink/sundance.c
> +++ b/drivers/net/ethernet/dlink/sundance.c
> @@ -580,6 +580,10 @@ static int sundance_probe1(struct pci_dev *pdev,
> dev->ethtool_ops = ðtool_ops;
> dev->watchdog_timeo = TX_TIMEOUT;
>
> + /* MTU range: 68 - 8191 */
> + dev->min_mtu = ETH_MIN_MTU;
> + dev->max_mtu = 8191;
> +
ICPlus datasheet defines the max frame size like 0x1514 or 0x4491
based on the RcvLargeFrames bit in the MACCtrl0 register
> pci_set_drvdata(pdev, dev);
>
> i = register_netdev(dev);
> @@ -713,8 +717,6 @@ static int sundance_probe1(struct pci_dev *pdev,
>
> static int change_mtu(struct net_device *dev, int new_mtu)
> {
> - if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */
> - return -EINVAL;
> if (netif_running(dev))
> return -EBUSY;
> dev->mtu = new_mtu;
> --
> 2.10.0
>
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking Jarod Wilson <jarod@redhat.com> - 2016-10-17 22:00 +0200
Re: [PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking Denis Kirjanov <kda@linux-powerpc.org> - 2016-10-18 15:50 +0200
Re: [PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking Jarod Wilson <jarod@redhat.com> - 2016-10-18 17:10 +0200
Re: [PATCH net-next 09/15] ethernet/dlink: use core min/max MTU checking Stefan Richter <stefanr@s5r6.in-berlin.de> - 2016-10-22 12:00 +0200
csiph-web