[PATCH 2/3] ARM-OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()

From	SF Markus Elfring <elfring@users.sourceforge.net>
Newsgroups	linux.kernel
Subject	[PATCH 2/3] ARM-OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()
Date	2016-10-15 23:00 +0200
Message-ID	<ssEdI-4pY-23@gated-at.bofh.it> (permalink)
References	<ssEdH-4pY-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 15 Oct 2016 22:24:29 +0200

A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 arch/arm/mach-omap2/mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 4bdfa3d..e1fa39e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -661,7 +661,7 @@ static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
 			m->balls[1] ? m->balls[1] : none);
 	seq_puts(s, "mode: ");
 	omap_mux_decode(s, val);
-	seq_printf(s, "\n");
+	seq_putc(s, '\n');
 	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
 			m->muxnames[0] ? m->muxnames[0] : none,
 			m->muxnames[1] ? m->muxnames[1] : none,
-- 
2.10.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 2/3] ARM-OMAP2+: mux: Use seq_putc() in  omap_mux_dbg_signal_show() SF Markus Elfring <elfring@users.sourceforge.net> - 2016-10-15 23:00 +0200

csiph-web