Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1496466
| From | Steve Twiss <stwiss.opensource@diasemi.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH V1 09/10] Documentation: dt: mfd: da9062/61 MFD binding |
| Date | 2016-10-06 11:20 +0200 |
| Message-ID | <spd0m-6Av-35@gated-at.bofh.it> (permalink) |
| References | <spcQG-6wB-15@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
From: Steve Twiss <stwiss.opensource@diasemi.com>
Extend existing DA9062 binding information to include the DA9061 PMIC for
MFD core and regulators.
Add a da9062-onkey link to the existing onkey binding file.
Add a da9062-thermal link to the new temperature monitoring binding file
found in [PATCH V1 8/10].
Delete the da9062-watchdog section and replace it with a link to the new
DA9061/62 binding information file added by [PATCH V1 7/10].
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
---
This patch applies against linux-next and v4.8
Hi,
This patch depends on acceptance of the main code for the DA9061 MFD:
- [PATCH V1 1/10] mfd: da9061: MFD core support
and also from the following binding file changes:
- [PATCH V1 6/10] Binding for onkey
- [PATCH V1 7/10] Binding for watchdog
- [PATCH V1 8/10] Binding for thermal
Regards,
Steve Twiss, Dialog Semiconductor Ltd.
Documentation/devicetree/bindings/mfd/da9062.txt | 45 +++++++++++++++++-------
1 file changed, 33 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index 38802b5..38ba5e2 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -1,22 +1,32 @@
* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-DA9062 consists of a large and varied group of sub-devices:
+The DA9062 driver is compatible with the DA9062 and DA9061 devices.
+
+Product information can be found here:
+- http://www.dialog-semiconductor.com/products/da9062
+- http://www.dialog-semiconductor.com/products/da9061
+
+DA9062 driver consists of a large and varied group of sub-devices:
Device Supply Names Description
------ ------------ -----------
da9062-regulator : : LDOs & BUCKs
da9062-rtc : : Real-Time Clock
+da9062-onkey : : On Key
da9062-watchdog : : Watchdog Timer
+da9062-thermal : : Thermal
======
Required properties:
-- compatible : Should be "dlg,da9062".
+- compatible : Should be
+ "dlg,da9062" for DA9062
+ "dlg,da9061" for DA9061
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9062.
+ the DA9062 or DA9061.
- interrupts : IRQ line information.
- interrupt-controller
@@ -25,8 +35,8 @@ further information on IRQ bindings.
Sub-nodes:
-- regulators : This node defines the settings for the LDOs and BUCKs. The
- DA9062 regulators are bound using their names listed below:
+- regulators : This node defines the settings for the LDOs and BUCKs.
+ The DA9062 regulators are bound using their names listed below:
buck1 : BUCK_1
buck2 : BUCK_2
@@ -37,6 +47,16 @@ Sub-nodes:
ldo3 : LDO_3
ldo4 : LDO_4
+ The DA9061 regulators are bound using their names listed below:
+
+ buck1 : BUCK_1
+ buck2 : BUCK_2
+ buck3 : BUCK_3
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+
The component follows the standard regulator framework and the bindings
details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
@@ -46,9 +66,14 @@ Sub-nodes:
with the DA9062. There are currently no entries in this binding, however
compatible = "dlg,da9062-rtc" should be added if a node is created.
-- watchdog: This node defines the settings for the watchdog driver associated
- with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
- if a node is created.
+
+- onkey : See ../input/da9062-onkey.txt
+
+
+- watchdog: See ../watchdog/da9062-watchdog.txt
+
+
+- thermal : See ../thermal/da9062-thermal.txt
Example:
@@ -64,10 +89,6 @@ Example:
compatible = "dlg,da9062-rtc";
};
- watchdog {
- compatible = "dlg,da9062-watchdog";
- };
-
regulators {
DA9062_BUCK1: buck1 {
regulator-name = "BUCK1";
--
end-of-patch for PATCH V1
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH V1 00/10] da9061: DA9061 driver submission Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
[PATCH V1 06/10] Documentation: dt: input: temperature driver Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
Re: [PATCH V1 06/10] Documentation: dt: input: temperature driver Rob Herring <robh@kernel.org> - 2016-10-10 15:40 +0200
RE: [PATCH V1 06/10] Documentation: dt: input: temperature driver Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-11 14:00 +0200
[PATCH V1 04/10] watchdog: da9061: watchdog driver Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
Re: [PATCH V1 04/10] watchdog: da9061: watchdog driver Guenter Roeck <linux@roeck-us.net> - 2016-10-06 15:30 +0200
[PATCH V1 03/10] Input: da9061: onkey driver Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
[PATCH V1 01/10] mfd: da9061: MFD core support Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
Re: [PATCH V1 01/10] mfd: da9061: MFD core support Keerthy <a0393675@ti.com> - 2016-10-06 12:40 +0200
RE: [PATCH V1 01/10] mfd: da9061: MFD core support Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 18:40 +0200
RE: [PATCH V1 01/10] mfd: da9061: MFD core support Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-07 16:40 +0200
Re: [PATCH V1 01/10] mfd: da9061: MFD core support Keerthy <a0393675@ti.com> - 2016-10-08 05:00 +0200
[PATCH V1 02/10] regulator: da9061: BUCK and LDO regulator driver Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
[PATCH V1 09/10] Documentation: dt: mfd: da9062/61 MFD binding Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
Re: [PATCH V1 09/10] Documentation: dt: mfd: da9062/61 MFD binding Rob Herring <robh@kernel.org> - 2016-10-10 15:50 +0200
[PATCH V1 10/10] MAINTAINERS: da9062/61 updates to the Dialog Semiconductor search terms Steve Twiss <stwiss.opensource@diasemi.com> - 2016-10-06 11:20 +0200
csiph-web