Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1494750

[PATCH] gpio/board.txt: point to gpiod_set_value

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

gpiod_set_value() is preffered interface these days, so add a
pointer. Also fix a missing ).

Signed-off-by: Pavel Machek <pavel@ucw.cz>

diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt
index 86d3fa9..589e789 100644
--- a/Documentation/gpio/board.txt
+++ b/Documentation/gpio/board.txt
@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
 description of the deprecated integer-based GPIO interface please refer to
 gpio-legacy.txt (actually, there is no real mapping possible with the old
 interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
 
 Platforms that make use of GPIOs must select ARCH_REQUIRE_GPIOLIB (if GPIO usage
 is mandatory) or ARCH_WANT_OPTIONAL_GPIOLIB (if GPIO support can be omitted) in
@@ -165,3 +165,6 @@ signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
 as active-low, its actual signal will be 0 after this code. Contrary to the legacy
 integer GPIO interface, the active-low property is handled during mapping and is
 thus transparent to GPIO consumers.
+
+Set of functions such as gpiod_set_value() is available to work with
+this interface.

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] gpio/board.txt: point to gpiod_set_value Pavel Machek <pavel@ucw.cz> - 2016-10-03 10:50 +0200
  Re: [PATCH] gpio/board.txt: point to gpiod_set_value Linus Walleij <linus.walleij@linaro.org> - 2016-10-10 10:50 +0200

csiph-web