Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1493690

Re: [PATCH 1/2] backlight: arcxcnn: add support for ArticSand devices

Show all headers | View raw

On Thu, Sep 29, 2016 at 12:34:39PM -0400, Olimpiu Dejeu wrote:
> Resubmition of arcxcnn backliught driver adding definitions of the
>  internal registers of the chip. 

s/backliught/backlight/

[...]

> +#ifdef CONFIG_OF
> +static int arcxcnn_parse_dt(struct arcxcnn *lp)
> +{
> +	struct device *dev = lp->dev;
> +	struct device_node *node = dev->of_node;
> +	u32 prog_length, prog_val, num_entry, sources[6];
> +	int ret;
> +
> +	if (!node) {
> +		dev_err(dev, "no platform data.\n");
> +		return -EINVAL;
> +	}
> +	of_property_read_string(node, "label", &lp->pdata->name);
> +	of_property_read_u32(node, "default-brightness", &prog_val);
> +	lp->pdata->initial_brightness = prog_val;

You must check the return value of the of_ accessors. If there's no
default-brightness property in the DT, prog_val will be uninitialised here.

> +	of_property_read_u32(node, "pwm-period", &lp->pdata->period_ns);

This was not in the binding document.

> +	/* Fill program from platform data if defined
> +	*/
> +	lp->pdata->prog_entries = 0;
> +	prog_length = of_get_child_count(node);
> +	if (prog_length > 0) {
> +		struct device_node *child;
> +		u32 i = 0;
> +
> +		for_each_child_of_node(node, child) {
> +			if (i >= ARCXCNN_MAX_PROGENTRIES)
> +				break;
> +			of_property_read_u32(child, "reg", &prog_val);
> +			lp->pdata->prog_addr[i] = (u8)prog_val;
> +			of_property_read_u32(child, "val", &prog_val);
> +			lp->pdata->prog_data[i] = (u8)prog_val;
> +			i++;
> +		}
> +		lp->pdata->prog_entries = i;
> +	}

This was also not documented.

What is this? What is it used for? Why is it in the DT?

> +	/* playback program now that its all installed */
> +	for (i = 0; i < lp->pdata->prog_entries; i++) {
> +		arcxcnn_write_byte(lp, lp->pdata->prog_addr[i],
> +				lp->pdata->prog_data[i]);
> +		/*
> +		printk(KERN_ALERT "%02X, %02X\n",
> +			lp->pdata->prog_addr[i], lp->pdata->prog_data[i]);
> +		*/
> +	}

Why is it necessary to have an arbitrary register programming sequence? What
exactly varies between parts?

I don't think this is the right way to solve your problem.

Thanks,
Mark.

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 1/2] backlight: arcxcnn: add support for ArticSand devices Olimpiu Dejeu <olimpiu@arcticsand.com> - 2016-09-29 18:40 +0200
  Re: [PATCH 1/2] backlight: arcxcnn: add support for ArticSand devices Mark Rutland <mark.rutland@arm.com> - 2016-09-29 21:40 +0200

csiph-web