[PATCH 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init

From	John Keeping <john@metanate.com>
Newsgroups	linux.kernel
Subject	[PATCH 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init
Date	2016-09-19 19:20 +0200
Message-ID	<sjaox-8hd-5@gated-at.bofh.it> (permalink)
References	<sjaox-8hd-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Some panels need to be configured with commands sent over the MIPI link,
which they will do in the prepare hook.  Call this after the PHY has
been initialized so that we are able to send commands to the panel.

Signed-off-by: John Keeping <john@metanate.com>
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index 4c945cc4d31a..9ff1cac5ef63 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -901,12 +901,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	dw_mipi_dsi_dphy_timing_config(dsi);
 	dw_mipi_dsi_dphy_interface_config(dsi);
 	dw_mipi_dsi_clear_err(dsi);
-	if (drm_panel_prepare(dsi->panel))
-		dev_err(dsi->dev, "failed to prepare panel\n");
 
 	dw_mipi_dsi_phy_init(dsi);
 	dw_mipi_dsi_wait_for_two_frames(dsi);
 
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
 	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
 	drm_panel_enable(dsi->panel);
 
-- 
2.10.0.278.g4f427b1.dirty

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping <john@metanate.com> - 2016-09-19 19:20 +0200

csiph-web