Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1485295
| From | Yinghai Lu <yinghai@kernel.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v14 09/17] sparc/PCI: Keep resource idx order with bridge register number |
| Date | 2016-09-16 22:10 +0200 |
| Message-ID | <si7Cp-13S-3@gated-at.bofh.it> (permalink) |
| References | <si7Cp-13S-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On one system found strange "no compatible bridge window" warning
even we already had pref_compat support that add extra pref bit for device
resource.
PCI: Claiming 0000:00:01.0: Resource 14: 0002000100000000..000200010fffffff [10220c]
PCI: Claiming 0000:01:00.0: Resource 1: 0002000100000000..000200010000ffff [100214]
pci 0000:01:00.0: can't claim BAR 1 [mem 0x2000100000000-0x200010000ffff 64bit]: no compatible bridge window
It turns out that pci_resource_compatible()/pci_up_path_over_pref_mem64()
just check resource with bridge pref mmio register idx 15, and we have put
resource to use mmio register idx 14 during of_scan_pci_bridge()
as the bridge does not have mmio resource.
We already fix pci_up_path_over_pref_mem64() to check all bus resources.
And at the same time, this patch make resource to have consistent sequence
like other arch or directly from pci_read_bridge_bases(),
even when non-pref mmio is missing, or out of ordering in firmware reporting.
Just hold i = 1 for non pref mmio, and i = 2 for pref mmio.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: sparclinux@vger.kernel.org
---
arch/sparc/kernel/pci.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 654cf21..c6a3971 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -481,7 +481,7 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
pci_read_bridge_bases(bus);
goto after_ranges;
}
- i = 1;
+ i = 3;
for (; len >= 32; len -= 32, ranges += 8) {
u64 start;
@@ -513,6 +513,12 @@ static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
" for bridge %s\n", node->full_name);
continue;
}
+ } else if ((flags & IORESOURCE_PREFETCH) &&
+ !bus->resource[2]->flags) {
+ res = bus->resource[2];
+ } else if (((flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH)) ==
+ IORESOURCE_MEM) && !bus->resource[1]->flags) {
+ res = bus->resource[1];
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
--
2.8.3
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
[PATCH v14 09/17] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu <yinghai@kernel.org> - 2016-09-16 22:10 +0200
csiph-web