Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1485042
| From | Greg KH <gregkh@linuxfoundation.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [patch 32/32] greybus: add to the build |
| Date | 2016-09-16 16:30 +0200 |
| Message-ID | <si2jo-5SZ-23@gated-at.bofh.it> (permalink) |
| References | <shfsm-830-21@gated-at.bofh.it> <shV8d-14L-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
This adds the drivers/greybus/ directory to the build and provides a valid Kconfig file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/Kconfig | 2 drivers/Makefile | 1 drivers/greybus/Kconfig | 219 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/greybus/Makefile | 96 ++++++++++++++++++++ 4 files changed, 318 insertions(+) --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -202,4 +202,6 @@ source "drivers/hwtracing/intel_th/Kconf source "drivers/fpga/Kconfig" +source "drivers/greybus/Kconfig" + endmenu --- a/drivers/Makefile +++ b/drivers/Makefile @@ -173,3 +173,4 @@ obj-$(CONFIG_STM) += hwtracing/stm/ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_NVMEM) += nvmem/ obj-$(CONFIG_FPGA) += fpga/ +obj-$(CONFIG_GREYBUS) += greybus/ --- /dev/null +++ b/drivers/greybus/Kconfig @@ -0,0 +1,219 @@ +menuconfig GREYBUS + tristate "Greybus support" + depends on SYSFS + ---help--- + This option enables the Greybus driver core. Greybus is an + hardware protocol that was designed to provide Unipro with a + sane application layer. It was originally designed for the + ARA project, a module phone system, but has shown up in other + phones, and can be tunneled over other busses in order to + control hardware devices. + + Say Y here to enable support for these types of drivers. + + To compile this code as a module, chose M here: the module + will be called greybus.ko + +if GREYBUS + +config GREYBUS_ES2 + tristate "Greybus ES3 USB host controller" + depends on USB + ---help--- + Select this option if you have a Toshiba ES3 USB device that + acts as a Greybus "host controller". This device is a bridge + from a USB device to a Unipro network. + + To compile this code as a module, chose M here: the module + will be called gb-es2.ko + +config GREYBUS_AUDIO + tristate "Greybus Audio Class driver" + depends on SOUND + ---help--- + Select this option if you have a device that follows the + Greybus Audio Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-audio.ko + +config GREYBUS_BOOTROM + tristate "Greybus Bootrom Class driver" + ---help--- + Select this option if you have a device that follows the + Greybus Bootrom Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-bootrom.ko + +config GREYBUS_CAMERA + tristate "Greybus Camera Class driver" + depends on MEDIA && LEDS_CLASS_FLASH && BROKEN + ---help--- + Select this option if you have a device that follows the + Greybus Camera Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-camera.ko + +config GREYBUS_FIRMWARE + tristate "Greybus Firmware Download Class driver" + depends on SPI + ---help--- + Select this option if you have a device that follows the + Greybus Firmware Download Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-firmware.ko + +config GREYBUS_HID + tristate "Greybus HID Class driver" + depends on HID && INPUT + ---help--- + Select this option if you have a device that follows the + Greybus HID Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-hid.ko + +config GREYBUS_LIGHT + tristate "Greybus LED Class driver" + depends on LEDS_CLASS + ---help--- + Select this option if you have a device that follows the + Greybus LED Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-light.ko + +config GREYBUS_LOG + tristate "Greybus Debug Log Class driver" + ---help--- + Select this option if you have a device that follows the + Greybus Debug Log Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-log.ko + +config GREYBUS_LOOPBACK + tristate "Greybus Loopback Class driver" + ---help--- + Select this option if you have a device that follows the + Greybus Debug Log Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-log.ko + +config GREYBUS_POWER + tristate "Greybus Powersupply Class driver" + depends on POWER_SUPPLY + ---help--- + Select this option if you have a device that follows the + Greybus Powersupply Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-power-supply.ko + +config GREYBUS_RAW + tristate "Greybus Raw Class driver" + ---help--- + Select this option if you have a device that follows the + Greybus Raw Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-raw.ko + +config GREYBUS_VIBRATOR + tristate "Greybus Vibrator Motor Class driver" + ---help--- + Select this option if you have a device that follows the + Greybus Vibrator Motor Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-vibrator.ko + +menuconfig GREYBUS_BRIDGED_PHY + tristate "Greybus Bridged PHY Class drivers" + ---help--- + Select this option to pick from a variety of Greybus Bridged + PHY class drivers. These drivers emulate a number of + different "traditional" busses by tunneling them over Greybus. + Examples of this include serial, SPI, USB, and others. + + To compile this code as a module, chose M here: the module + will be called gb-phy.ko + +if GREYBUS_BRIDGED_PHY + +config GREYBUS_GPIO + tristate "Greybus GPIO Bridged PHY driver" + depends on GPIO + ---help--- + Select this option if you have a device that follows the + Greybus GPIO Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-gpio.ko + +config GREYBUS_I2C + tristate "Greybus I2C Bridged PHY driver" + depends on I2C + ---help--- + Select this option if you have a device that follows the + Greybus I2C Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-i2c.ko + +config GREYBUS_PWM + tristate "Greybus PWM Bridged PHY driver" + depends on PWM + ---help--- + Select this option if you have a device that follows the + Greybus PWM Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-pwm.ko + +config GREYBUS_SDIO + tristate "Greybus SDIO Bridged PHY driver" + depends on MMC + ---help--- + Select this option if you have a device that follows the + Greybus SDIO Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-sdio.ko + +config GREYBUS_SPI + tristate "Greybus SPI Bridged PHY driver" + depends on SPI + ---help--- + Select this option if you have a device that follows the + Greybus SPI Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-spi.ko + +config GREYBUS_UART + tristate "Greybus UART Bridged PHY driver" + depends on TTY + ---help--- + Select this option if you have a device that follows the + Greybus UART Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-uart.ko + +config GREYBUS_USB + tristate "Greybus USB Host Bridged PHY driver" + depends on USB + ---help--- + Select this option if you have a device that follows the + Greybus USB Host Bridged PHY Class specification. + + To compile this code as a module, chose M here: the module + will be called gb-usb.ko + +endif # GREYBUS_BRIDGED_PHY +endif # GREYBUS --- /dev/null +++ b/drivers/greybus/Makefile @@ -0,0 +1,96 @@ +# Greybus core +greybus-y := core.o \ + debugfs.o \ + hd.o \ + manifest.o \ + module.o \ + interface.o \ + bundle.o \ + connection.o \ + control.o \ + svc.o \ + svc_watchdog.o \ + operation.o \ + timesync.o \ + timesync_platform.o + +obj-$(CONFIG_GREYBUS) += greybus.o + +# needed for trace events +ccflags-y += -I$(src) + + +# Greybus Host controller drivers +gb-es2-y := es2.o + +obj-$(CONFIG_GREYBUS_ES2) += gb-es2.o + +# Greybus class drivers +gb-bootrom-y := bootrom.o +gb-camera-y := camera.o +gb-firmware-y := fw-core.o fw-download.o fw-management.o authentication.o +gb-spilib-y := spilib.o +gb-hid-y := hid.o +gb-light-y := light.o +gb-log-y := log.o +gb-loopback-y := loopback.o +gb-power-supply-y := power_supply.o +gb-raw-y := raw.o +gb-vibrator-y := vibrator.o + +obj-$(CONFIG_GREYBUS_BOOTROM) += gb-bootrom.o +obj-$(CONFIG_GREYBUS_CAMERA) += gb-camera.o +obj-$(CONFIG_GREYBUS_FIRMWARE) += gb-firmware.o gb-spilib.o +obj-$(CONFIG_GREYBUS_HID) += gb-hid.o +obj-$(CONFIG_GREYBUS_LIGHT) += gb-light.o +obj-$(CONFIG_GREYBUS_LOG) += gb-log.o +obj-$(CONFIG_GREYBUS_LOOPBACK) += gb-loopback.o +obj-$(CONFIG_GREYBUS_POWER) += gb-power-supply.o +obj-$(CONFIG_GREYBUS_RAW) += gb-raw.o +obj-$(CONFIG_GREYBUS_VIBRATOR) += gb-vibrator.o + +# Greybus Audio is a bunch of modules +gb-audio-module-y := audio_module.o audio_topology.o +gb-audio-codec-y := audio_codec.o +gb-audio-gb-y := audio_gb.o +gb-audio-apbridgea-y := audio_apbridgea.o +gb-audio-manager-y := audio_manager.o audio_manager_module.o + +# Greybus Audio sysfs helpers can be useful when debugging +#GB_AUDIO_MANAGER_SYSFS ?= true +#ifeq ($(GB_AUDIO_MANAGER_SYSFS),true) +#gb-audio-manager-y += audio_manager_sysfs.o +#ccflags-y += -DGB_AUDIO_MANAGER_SYSFS +#endif + +obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-codec.o +obj-$(CONFIG_GREYBUS_AUDIO_MSM8994) += gb-audio-module.o +obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-gb.o +obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-apbridgea.o +obj-$(CONFIG_GREYBUS_AUDIO) += gb-audio-manager.o + + +# Greybus Bridged PHY drivers +gb-gbphy-y := gbphy.o +gb-gpio-y := gpio.o +gb-i2c-y := i2c.o +gb-pwm-y := pwm.o +gb-sdio-y := sdio.o +gb-spi-y := spi.o +gb-uart-y := uart.o +gb-usb-y := usb.o + +obj-$(CONFIG_GREYBUS_BRIDGED_PHY) += gb-gbphy.o +obj-$(CONFIG_GREYBUS_GPIO) += gb-gpio.o +obj-$(CONFIG_GREYBUS_I2C) += gb-i2c.o +obj-$(CONFIG_GREYBUS_PWM) += gb-pwm.o +obj-$(CONFIG_GREYBUS_SDIO) += gb-sdio.o +obj-$(CONFIG_GREYBUS_SPI) += gb-spi.o gb-spilib.o +obj-$(CONFIG_GREYBUS_UART) += gb-uart.o +obj-$(CONFIG_GREYBUS_USB) += gb-usb.o + + +# Greybus Platform driver +gb-arche-y := arche-platform.o arche-apb-ctrl.o + +obj-$(CONFIG_USB_HSIC_USB3613) += gb-arche.o
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[patch 00/32] Greybus driver subsystem Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 08:50 +0200 [patch 02/32] greybus: interface control logic Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 08:50 +0200 [patch 08/32] greybus: bootrom driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 15:30 +0200 [patch 05/32] greybus: trace.h Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 15:30 +0200 [patch 04/32] greybus: host driver framework Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 15:30 +0200 [patch 13/32] greybus: HID driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 18/32] greybus: raw driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 14/32] greybus: LED driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 15/32] greybus: logging driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 17/32] greybus: power supply driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 16/32] greybus: loopback driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 20/32] greybus: vibrator driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:20 +0200 [patch 25/32] greybus: bridged phy pwm driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 23/32] greybus: bridged phy gpio driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 24/32] greybus: bridged phy i2c driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 29/32] greybus: bridged phy usb driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 32/32] greybus: add to the build Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 26/32] greybus: bridged phy sdio driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 28/32] greybus: bridged phy uart driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 27/32] greybus: bridged phy spi driver Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 22/32] greybus: bridged phy bus code Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200 [patch 31/32] greybus: documentation Greg KH <gregkh@linuxfoundation.org> - 2016-09-16 16:30 +0200
csiph-web