Re: [PATCH] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board

From	Maxime Ripard <maxime.ripard@free-electrons.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
Date	2016-09-15 10:40 +0200
Message-ID	<shAn7-4EW-1@gated-at.bofh.it> (permalink)
References	<shAn7-4EW-3@gated-at.bofh.it> <shAn7-4EW-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Thu, Sep 15, 2016 at 10:22:18AM +0800, Icenowy Zheng wrote:
> 
> 
> 15.09.2016, 10:15, "Icenowy Zheng" <icenowy@aosc.xyz>:
> > UART1 is connected to the bluetooth part of RTL8723BS WiFi/BT combo card
> > on iNet D978 Rev2 board.
> >
> > Enable the UART1 to make it possible to use the modified hciattach by
> > Realtek to drive the BT part of RTL8723BS.
> >
> > On the board no r_uart pins are found now (the onboard RX/TX pins are
> > wired to PF2/PF4, which is muxed with mmc0), so also disabled it.
> >
> > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> 
> Oh I forgot to add a patch version number...
> It's PATCH v3.
> 
> (But it seems that I should send a v4 to split the dtsi change and dts change.)

Indeed :)

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH] ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-09-15 10:40 +0200

csiph-web