Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1482451

Re: [PATCH v4] usb: core: setup dma_pfn_offset for USB devices and, interfaces

Show all headers | View raw

On Tue, 13 Sep 2016, Arnd Bergmann wrote:

> On Tuesday, September 13, 2016 11:16:03 AM CEST Roger Quadros wrote:
> > If dma_pfn_offset is not inherited correctly from the host controller,
> > it might result in sub-optimal configuration as bounce
> > buffer limit might be set to less than optimal level.
> > 
> > Consider the mass storage device case.
> > USB storage driver creates a scsi host for the mass storage interface in
> > drivers/usb/storage/usb.c
> > The scsi host parent device is nothing but the the USB interface device.
> > Now, __scsi_init_queue() calls scsi_calculate_bounce_limit() to find out
> > and set the block layer bounce limit.
> > scsi_calculate_bounce_limit() uses dma_max_pfn(host_dev) to get the
> > bounce_limit. host_dev is nothing but the device representing the
> > mass storage interface.
> > If that device doesn't have the right dma_pfn_offset, then dma_max_pfn()
> > is messed up and the bounce buffer limit is wrong.
> > 
> > e.g. On Keystone 2 systems, dma_max_pfn() is 0x87FFFF and dma_mask_pfn
> > is 0xFFFFF. Consider a mass storage use case: Without this patch,
> > usb scsi host device (usb-storage) will get a dma_pfn_offset of 0 resulting
> > in a dma_max_pfn() of 0xFFFFF within the scsi layer
> > (scsi_calculate_bounce_limit()).
> > This will result in bounce buffers being unnecessarily used.
> > 
> > Hint: On 32-bit ARM platforms dma_max_pfn() = dma_mask_pfn + dma_pfn_offset
> > 
> > Signed-off-by: Roger Quadros <rogerq@ti.com>
> 
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Alan Stern <stern@rowland.harvard.edu>

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Roger Quadros <rogerq@ti.com> - 2016-09-12 13:30 +0200
  Re: [PATCH v2] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Alan Stern <stern@rowland.harvard.edu> - 2016-09-12 15:10 +0200
    Re: [PATCH v2] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Roger Quadros <rogerq@ti.com> - 2016-09-12 16:10 +0200
    Re: [PATCH v2] usb: core: setup dma_pfn_offset for USB devices and, interfaces Arnd Bergmann <arnd@arndb.de> - 2016-09-12 16:40 +0200
      Re: [PATCH v2] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Alan Stern <stern@rowland.harvard.edu> - 2016-09-12 20:20 +0200
  [PATCH v3] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Roger Quadros <rogerq@ti.com> - 2016-09-12 16:20 +0200
    [PATCH v4] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Roger Quadros <rogerq@ti.com> - 2016-09-13 10:20 +0200
      Re: [PATCH v4] usb: core: setup dma_pfn_offset for USB devices and, interfaces Arnd Bergmann <arnd@arndb.de> - 2016-09-13 12:40 +0200
        Re: [PATCH v4] usb: core: setup dma_pfn_offset for USB devices and,  interfaces Alan Stern <stern@rowland.harvard.edu> - 2016-09-13 15:20 +0200

csiph-web