Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1478273
| From | Stanimir Varbanov <svarbanov@mm-sol.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] ARM: dts: msm8974: Add definitions for QCE & cryptobam |
| Date | 2016-09-07 15:10 +0200 |
| Message-ID | <seKM1-9T-3@gated-at.bofh.it> (permalink) |
| References | <sbTiN-6Gt-17@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Iaroslav,
On 08/30/2016 06:37 PM, Iaroslav Gridin wrote:
> From: Voker57 <voker57@gmail.com>
>
> Add device tree definitions for Qualcomm Cryptography engine and its BAM
> Signed-off-by: Iaroslav Gridin <voker57@gmail.com>
> ---
> arch/arm/boot/dts/qcom-msm8974.dtsi | 42 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index 561d4d1..c0da739 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -287,6 +287,48 @@
> reg = <0xf9011000 0x1000>;
> };
>
> + cryptobam: dma@fd444000 {
> + compatible = "qcom,bam-v1.4.0";
> + reg = <0xfd444000 0x15000>;
> + interrupts = <0 236 0>;
should be
interrupts = <GIC_SPI 236 IRQ_NONE>;
> + clocks = <&gcc GCC_CE2_AHB_CLK>,
> + <&gcc GCC_CE2_AXI_CLK>,
> + <&gcc GCC_CE2_CLK>;
> + clock-names = "bam_clk", "axi_clk", "core_clk";
> + #dma-cells = <1>;
> + qcom,ee = <1>;
> + qcom,controlled-remotely;
> + };
indentation please.
> +
> + qcom,qcrypto@fd440000 {
> + compatible = "qcom,crypto-v5.1";
> + reg = <0xfd45a000 0x6000>;
> + reg-names = "crypto-base";
> + interrupts = <0 236 0>;
> + qcom,bam-pipe-pair = <2>;
> + qcom,ce-hw-instance = <1>;
> + qcom,ce-device = <0>;
You are getting those 3 properties from qcom downstream kernel, so they
are not relevant to qce in mainline kernel, please drop them.
> + clocks = <&gcc GCC_CE2_CLK>,
> + <&gcc GCC_CE2_AHB_CLK>,
> + <&gcc GCC_CE2_AXI_CLK>,
> + <&gcc CE2_CLK_SRC>;
> +
> + dmas = <&cryptobam 2>, <&cryptobam 3>;
> + dma-names = "rx", "tx";
> + clock-names = "core", "iface", "bus", "core_src";
from here to ...
> + qcom,clk-mgmt-sus-res;
> + qcom,msm-bus,name = "qcrypto-noc";
> +
> + qcom,msm-bus,num-cases = <2>;
> + qcom,msm-bus,num-paths = <1>;
> + qcom,use-sw-aes-cbc-ecb-ctr-algo;
> + qcom,use-sw-aes-xts-algo;
> + qcom,use-sw-ahash-algo;
> + qcom,msm-bus,vectors-KBps = <56 512 0 0>,
> + <56 512 3936000 393600>;
... here, please drop these properties they are no parsed and useful.
regards,
Stan
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] ARM: dts: msm8974: Add definitions for QCE & cryptobam Iaroslav Gridin <voker57@gmail.com> - 2016-08-30 17:40 +0200
Re: [PATCH] ARM: dts: msm8974: Add definitions for QCE & cryptobam Stanimir Varbanov <svarbanov@mm-sol.com> - 2016-09-07 15:10 +0200
Re: [PATCH] ARM: dts: msm8974: Add definitions for QCE & cryptobam Iaroslav Gridin <voker57@gmail.com> - 2016-09-07 18:30 +0200
csiph-web