Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1474003

[PATCH v3 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit

From Stephen Boyd <stephen.boyd@linaro.org>
Newsgroups linux.kernel
Subject [PATCH v3 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit
Date 2016-09-01 02:50 +0200
Message-ID <scomC-15L-47@gated-at.bofh.it> (permalink)
References <scomB-15L-3@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

The MSM chipidea wrapper has two bits that are used to reset the
first or second phy. Add support for these bits via the reset
controller framework, so that phy drivers can reset their
hardware at the right time during initialization.

Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
 drivers/usb/chipidea/Kconfig       |  1 +
 drivers/usb/chipidea/ci_hdrc_msm.c | 50 ++++++++++++++++++++++++++++++++++++--
 2 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 19c20eaa23f2..fc96f5cdcb5c 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -2,6 +2,7 @@ config USB_CHIPIDEA
 	tristate "ChipIdea Highspeed Dual Role Controller"
 	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
 	select EXTCON
+	select RESET_CONTROLLER
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on ChipIdea silicon IP. It supports:
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 2489a63d3e75..fe96df7b530c 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -14,6 +14,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/io.h>
+#include <linux/reset-controller.h>
 #include <linux/extcon.h>
 #include <linux/of.h>
 
@@ -31,8 +32,10 @@
 #define HSPHY_SESS_VLD_CTRL		BIT(25)
 
 /* Vendor base starts at 0x200 beyond CI base */
+#define HS_PHY_CTRL			0x0040
 #define HS_PHY_SEC_CTRL			0x0078
 #define HS_PHY_DIG_CLAMP_N		BIT(16)
+#define HS_PHY_POR_ASSERT		BIT(0)
 
 struct ci_hdrc_msm {
 	struct platform_device *ci;
@@ -40,11 +43,43 @@ struct ci_hdrc_msm {
 	struct clk *iface_clk;
 	struct clk *fs_clk;
 	struct ci_hdrc_platform_data pdata;
+	struct reset_controller_dev rcdev;
 	bool secondary_phy;
 	bool hsic;
 	void __iomem *base;
 };
 
+static int
+ci_hdrc_msm_por_reset(struct reset_controller_dev *r, unsigned long id)
+{
+	struct ci_hdrc_msm *ci_msm = container_of(r, struct ci_hdrc_msm, rcdev);
+	void __iomem *addr = ci_msm->base;
+	u32 val;
+
+	if (id)
+		addr += HS_PHY_SEC_CTRL;
+	else
+		addr += HS_PHY_CTRL;
+
+	val = readl_relaxed(addr);
+	val |= HS_PHY_POR_ASSERT;
+	writel(val, addr);
+	/*
+	 * wait for minimum 10 microseconds as suggested by manual.
+	 * Use a slightly larger value since the exact value didn't
+	 * work 100% of the time.
+	 */
+	udelay(12);
+	val &= ~HS_PHY_POR_ASSERT;
+	writel(val, addr);
+
+	return 0;
+}
+
+static const struct reset_control_ops ci_hdrc_msm_reset_ops = {
+	.reset = ci_hdrc_msm_por_reset,
+};
+
 static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 {
 	struct device *dev = ci->dev->parent;
@@ -186,10 +221,18 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 	if (!ci->base)
 		return -ENOMEM;
 
-	ret = clk_prepare_enable(ci->fs_clk);
+	ci->rcdev.owner = THIS_MODULE;
+	ci->rcdev.ops = &ci_hdrc_msm_reset_ops;
+	ci->rcdev.of_node = pdev->dev.of_node;
+	ci->rcdev.nr_resets = 2;
+	ret = reset_controller_register(&ci->rcdev);
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(ci->fs_clk);
+	if (ret)
+		goto err_fs;
+
 	reset_control_assert(reset);
 	usleep_range(10000, 12000);
 	reset_control_deassert(reset);
@@ -198,7 +241,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 
 	ret = clk_prepare_enable(ci->core_clk);
 	if (ret)
-		return ret;
+		goto err_fs;
 
 	ret = clk_prepare_enable(ci->iface_clk);
 	if (ret)
@@ -236,6 +279,8 @@ err_mux:
 	clk_disable_unprepare(ci->iface_clk);
 err_iface:
 	clk_disable_unprepare(ci->core_clk);
+err_fs:
+	reset_controller_unregister(&ci->rcdev);
 	return ret;
 }
 
@@ -247,6 +292,7 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev)
 	ci_hdrc_remove_device(ci->ci);
 	clk_disable_unprepare(ci->iface_clk);
 	clk_disable_unprepare(ci->core_clk);
+	reset_controller_unregister(&ci->rcdev);
 
 	return 0;
 }
-- 
2.9.0.rc2.8.ga28705d

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 00/22] Support qcom's HSIC USB and rewrite USB2 HS phy support Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 06/22] usb: chipidea: Add platform flag for wrapper phy management Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 12/22] usb: chipidea: msm: Rely on core to override AHBBURST Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 16/22] usb: chipidea: msm: Restore wrapper settings after reset Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 11/22] usb: chipidea: msm: Mark device as runtime pm active Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 04/22] usb: chipidea: Only read/write OTGSC from one  place Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:00 +0200
  [PATCH v3 17/22] usb: chipidea: msm: Make platform data driver local instead of global Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device  properties Heikki Krogerus <heikki.krogerus@linux.intel.com> - 2016-09-02 16:20 +0200
      Re: [PATCH v3 03/22] usb: ulpi: Support device discovery via device properties Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-03 03:20 +0200
  [PATCH v3 20/22] usb: chipidea: msm: Be silent on probe defer errors Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 15/22] usb: chipidea: msm: Mux over secondary phy at the right time Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 13/22] usb: chipidea: msm: Use hw_write_id_reg() instead of writel Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 19/22] usb: chipidea: msm: Handle phy power states Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 22/22] phy: Add support for Qualcomm's USB HS phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 05/22] usb: chipidea: Handle extcon events properly Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 01/22] of: device: Support loading a module with OF based modalias Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 02/22] of: device: Export of_device_{get_modalias,uvent_modalias} to modules Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 14/22] usb: chipidea: msm: Add proper clk and reset support Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
  [PATCH v3 09/22] usb: chipidea: Add support for ULPI PHY bus Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 09/22] usb: chipidea: Add support for ULPI PHY bus Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:00 +0200
  [PATCH v3 18/22] usb: chipidea: msm: Add reset controller for PHY POR bit Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 18/22] usb: chipidea: msm: Add reset controller for  PHY POR bit Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:50 +0200
  [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Peter Chen <hzpeterchen@gmail.com> - 2016-09-02 05:30 +0200
      Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-03 03:10 +0200
        Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Peter Chen <hzpeterchen@gmail.com> - 2016-09-05 04:40 +0200
          Re: [PATCH v3 10/22] usb: chipidea: Consolidate extcon notifiers Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-06 19:50 +0200
  [PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200
    Re: [PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy Vivek Gautam <vivek.gautam@codeaurora.org> - 2016-09-01 08:20 +0200
      Re: [PATCH v3 21/22] phy: Add support for Qualcomm's USB HSIC phy vivek.gautam@codeaurora.org - 2016-09-02 13:30 +0200
  [PATCH v3 07/22] usb: chipidea: Notify events when switching host mode Stephen Boyd <stephen.boyd@linaro.org> - 2016-09-01 02:50 +0200

csiph-web