Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1474667
| From | Andi Shyti <andi.shyti@samsung.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 0/7] Add support for IR transmitters |
| Date | 2016-09-01 23:30 +0200 |
| Message-ID | <scHIB-79t-9@gated-at.bofh.it> (permalink) |
| Organization | linux.* mail to news gateway |
Hi,
The main goal is to add support in the rc framework for IR
transmitters, which currently is only supported by lirc but that
is not the preferred way.
The last patch adds support for an IR transmitter driven by
the MOSI line of an SPI controller, it's the case of the Samsung
TM2(e) board which support is currently ongoing.
Changelog from version 1:
The RFC is now PATCH. The main difference is that this version
doesn't try to add the any bit streaming protocol and doesn't
modify any LIRC interface specification.
patch 1: updates all the drivers using rc_allocate_device
patch 2: fixed errors and warning reported from the kbuild test
robot
patch 5: this patch has been dropped and replaced with a new one
which avoids waiting for transmitters.
patch 6: added new properties to the dts specification
patch 7: the driver uses the pulse/space input and converts it to
a bit stream.
Thanks,
Andi
Andi Shyti (7):
[media] rc-main: assign driver type during allocation
[media] rc-main: split setup and unregister functions
[media] rc-core: add support for IR raw transmitters
[media] rc-ir-raw: do not generate any receiving thread for raw
transmitters
[media] ir-lirc-codec: don't wait any transmitting time for tx only
devices
Documentation: bindings: add documentation for ir-spi device driver
[media] rc: add support for IR LEDs driven through SPI
Documentation/devicetree/bindings/media/spi-ir.txt | 26 +++
drivers/hid/hid-picolcd_cir.c | 3 +-
drivers/media/common/siano/smsir.c | 3 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 11 +-
drivers/media/pci/cx88/cx88-input.c | 3 +-
drivers/media/pci/dm1105/dm1105.c | 3 +-
drivers/media/pci/mantis/mantis_input.c | 2 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 3 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/Kconfig | 9 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ati_remote.c | 3 +-
drivers/media/rc/ene_ir.c | 3 +-
drivers/media/rc/fintek-cir.c | 3 +-
drivers/media/rc/gpio-ir-recv.c | 3 +-
drivers/media/rc/igorplugusb.c | 3 +-
drivers/media/rc/iguanair.c | 3 +-
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 3 +-
drivers/media/rc/imon.c | 3 +-
drivers/media/rc/ir-hix5hd2.c | 3 +-
drivers/media/rc/ir-lirc-codec.c | 2 +-
drivers/media/rc/ir-spi.c | 221 +++++++++++++++++++++
drivers/media/rc/ite-cir.c | 3 +-
drivers/media/rc/mceusb.c | 3 +-
drivers/media/rc/meson-ir.c | 3 +-
drivers/media/rc/nuvoton-cir.c | 3 +-
drivers/media/rc/rc-ir-raw.c | 17 +-
drivers/media/rc/rc-loopback.c | 3 +-
drivers/media/rc/rc-main.c | 179 ++++++++++-------
drivers/media/rc/redrat3.c | 3 +-
drivers/media/rc/st_rc.c | 3 +-
drivers/media/rc/streamzap.c | 3 +-
drivers/media/rc/sunxi-cir.c | 3 +-
drivers/media/rc/ttusbir.c | 3 +-
drivers/media/rc/winbond-cir.c | 3 +-
drivers/media/usb/au0828/au0828-input.c | 3 +-
drivers/media/usb/cx231xx/cx231xx-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 3 +-
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 3 +-
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 3 +-
drivers/staging/media/cec/cec-core.c | 3 +-
include/media/rc-core.h | 13 +-
47 files changed, 421 insertions(+), 164 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/spi-ir.txt
create mode 100644 drivers/media/rc/ir-spi.c
--
2.9.3
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
[PATCH v2 0/7] Add support for IR transmitters Andi Shyti <andi.shyti@samsung.com> - 2016-09-01 23:30 +0200
[PATCH v2 7/7] [media] rc: add support for IR LEDs driven through SPI Andi Shyti <andi.shyti@samsung.com> - 2016-09-01 23:30 +0200
[PATCH v2 5/7] [media] ir-lirc-codec: don't wait any transmitting time for tx only devices Andi Shyti <andi.shyti@samsung.com> - 2016-09-01 23:40 +0200
Re: [PATCH v2 5/7] [media] ir-lirc-codec: don't wait any transmitting time for tx only devices Sean Young <sean@mess.org> - 2016-09-02 10:50 +0200
[PATCH v2 3/7] [media] rc-core: add support for IR raw transmitters Andi Shyti <andi.shyti@samsung.com> - 2016-09-01 23:40 +0200
Re: [PATCH v2 3/7] [media] rc-core: add support for IR raw transmitters Sean Young <sean@mess.org> - 2016-09-01 23:40 +0200
Re: [PATCH v2 3/7] [media] rc-core: add support for IR raw transmitters kbuild test robot <lkp@intel.com> - 2016-09-02 02:30 +0200
csiph-web