Re: [PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board

From	Krzysztof Kozlowski <k.kozlowski@samsung.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board
Date	2016-08-31 09:30 +0200
Message-ID	<sc88a-7Pb-25@gated-at.bofh.it> (permalink)
References	<sc6SJ-784-13@gated-at.bofh.it> <sc7F8-7q3-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 08/31/2016 08:54 AM, Andrzej Hajda wrote:
> On 08/31/2016 08:08 AM, Milo Kim wrote:
>> * GPIO for HDMI hot plug detect
>>   GPX3_7 is used. The HPD awareness is done when the GPIO is active high.
>>
>> * Enable HDMI block in Exynos5420
>>   HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
>>   requires 1.8V LDO7 (PVDD_ANAIP_1V8).
>>
>> * Support HDMI display data channel
>>   I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
>>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-samsung-soc@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
> 
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Thanks, applied with Andrzej's review.

Best regards,
Krzysztof

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board Milo Kim <woogyom.kim@gmail.com> - 2016-08-31 08:10 +0200
  Re: [PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board Andrzej Hajda <a.hajda@samsung.com> - 2016-08-31 09:00 +0200
    Re: [PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-08-31 09:30 +0200

csiph-web