Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1471831
| From | Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v5 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM |
| Date | 2016-08-29 15:30 +0200 |
| Message-ID | <sbuNr-7PD-3@gated-at.bofh.it> (permalink) |
| References | <qYRh0-2zl-21@gated-at.bofh.it> <qYRh0-2zl-19@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Marcel,
On 02/05/2016 06:12 PM, Marcel Ziswiler wrote:
> From: Petr Štetiar <ynezz@true.cz>
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Signed-off-by: Petr Štetiar <ynezz@true.cz>
> Reviewed-by: Stefan Agner <stefan@agner.ch>
> ---
>
because the change is in mainline now below is kind of out of date
information, but you may find it helpful.
[snip]
> - fixed HDMI DDC (requires GPIO-based bitbanging I2C to be enabled)
This is not needed.
[snip]
> + /* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
> + i2cddc: i2c@0 {
> + compatible = "i2c-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c_ddc>;
> + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
> + &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
> + >;
> + i2c-gpio,delay-us = <2>; /* ~100 kHz */
> + status = "disabled";
> + };
> +
This is not needed.
[snip]
> + pinctrl_i2c_ddc: gpioi2cddcgrp {
> + fsl,pins = <
> + /* DDC bitbang */
> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
> + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
> + >;
> + };
> +
Practically you don't need this overcomplicated GPIO-based bitbanging
to emulate I2C, because the DW HDMI controller has a reduced I2C
controller on board, you may take a look at its support published here:
http://www.spinics.net/lists/dri-devel/msg116308.html
To utilize it the pads should be set to HDMI function instead of
I2C or GPIO.
--
With best wishes,
Vladimir
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
Re: [PATCH v5 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> - 2016-08-29 15:30 +0200 Re: [PATCH v5 1/2] ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM Stefan Agner <stefan@agner.ch> - 2016-08-29 23:10 +0200
csiph-web