Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1472839

Re: [PATCH 1/2] arm64: kernel: Add SMC Session ID to results

Show all headers | View raw

On Tue, Aug 23, 2016 at 11:38:41AM +0100, Lorenzo Pieralisi wrote:
> On Mon, Aug 22, 2016 at 05:38:31PM -0700, Stephen Boyd wrote:
> 
> [...]
> 
> > This all comes about because the firmware generates a session id
> > for the SMC call and jams it in x6. The assembly on the
> > non-secure side is written with a tight loop around the smc
> > instruction so that when the return value indicates
> > "interrupted", x6 is kept intact and the non-secure OS can jump
> > back to the secure OS without register reloading. Perhaps
> > referring to x6 as result value is not correct because it's
> > really a session id that's irrelevant once the smc call
> > completes.
> 
> Sorry I missed this bit. The session id is _generated_ by secure
> firmware (probably only when the value passed in x6 == 0 (?))
> and actually returned to the caller so that subsequent (interrupted)
> calls can re-issue the same value, is that correct ?
> 
> If that's the case the value in x6 is a result value from an SMCCC
> perspective and your current FW is not SMCCC compliant.
> 

So is Will's solution to this ok?  If so I will respin with the minor change to
get it working and resend.  If not, do I roll my own smccc wrapper?

Regards,

Andy

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 1/2] arm64: kernel: Add SMC Session ID to results Andy Gross <andy.gross@linaro.org> - 2016-08-30 22:20 +0200
  Re: [PATCH 1/2] arm64: kernel: Add SMC Session ID to results Will Deacon <will.deacon@arm.com> - 2016-08-31 16:40 +0200

csiph-web