Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1470744

[PATCH v2 08/19] SEAD3: Probe parallel flash via DT

Show all headers | View raw

Probe the system parallel flash using device tree rather than platform
code, in order to reduce the amount of the latter.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>

---

Changes in v2:
- Provide bank-width
- Move partitions beneath partitions node
- s/pflash/flash/

 arch/mips/boot/dts/mti/sead3.dts     | 24 +++++++++++++++++++++++
 arch/mips/mti-sead3/sead3-platform.c | 37 ------------------------------------
 2 files changed, 24 insertions(+), 37 deletions(-)

diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 49f57c2..8844cc0 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -69,6 +69,30 @@
 		has-transaction-translator;
 	};
 
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
 	/* UART connected to FTDI & miniUSB socket */
 	uart0: uart@1f000900 {
 		compatible = "ns16550a";
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
index 21047b5..5c1f42a 100644
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ b/arch/mips/mti-sead3/sead3-platform.c
@@ -8,44 +8,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 
-static struct mtd_partition sead3_mtd_partitions[] = {
-	{
-		.name =		"User FS",
-		.offset =	0x00000000,
-		.size =		0x01fc0000,
-	}, {
-		.name =		"Board Config",
-		.offset =	0x01fc0000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	},
-};
-
-static struct physmap_flash_data sead3_flash_data = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(sead3_mtd_partitions),
-	.parts		= sead3_mtd_partitions
-};
-
-static struct resource sead3_flash_resource = {
-	.start		= 0x1c000000,
-	.end		= 0x1dffffff,
-	.flags		= IORESOURCE_MEM
-};
-
-static struct platform_device sead3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sead3_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sead3_flash_resource,
-};
-
 #define LEDFLAGS(bits, shift)		\
 	((bits << 8) | (shift << 8))
 
@@ -113,7 +77,6 @@ static struct platform_device sead3_led_device = {
 };
 
 static struct platform_device *sead3_platform_devices[] __initdata = {
-	&sead3_flash,
 	&pled_device,
 	&fled_device,
 	&sead3_led_device,
-- 
2.9.3

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 00/19] MIPS: SEAD3 device tree conversion Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:20 +0200
  [PATCH v2 13/19] MIPS: SEAD3: Parse memsize in DT shim Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 16/19] dt-bindings: img-ascii-lcd: Document a binding for simple ASCII LCDs Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
    Re: [PATCH v2 16/19] dt-bindings: img-ascii-lcd: Document a binding  for simple ASCII LCDs Rob Herring <robh@kernel.org> - 2016-08-31 18:20 +0200
  [PATCH v2 14/19] MIPS: SEAD3: Drop use of cobalt fbdev driver Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 08/19] SEAD3: Probe parallel flash via DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 06/19] MIPS: SEAD3: Probe EHCI controller using DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 15/19] fbdev: cobalt_lcdfb: Drop SEAD3 support Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 11/19] MIPS: SEAD3: Reset via generic syscon-reboot driver & DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 02/19] MIPS: SEAD3: Probe interrupt controllers using DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 09/19] MIPS: SEAD3: Use register-bit-led driver via DT for LEDs Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 04/19] MIPS: SEAD3: Use generic ns16550a earlycon support Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 03/19] MIPS: SEAD3: Probe UARTs using DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 07/19] usb: host: ehci-sead3: Remove SEAD-3 EHCI code Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
    Re: [PATCH v2 07/19] usb: host: ehci-sead3: Remove SEAD-3 EHCI code Alan Stern <stern@rowland.harvard.edu> - 2016-08-26 18:00 +0200
  [PATCH v2 12/19] MIPS: SEAD3: Use generic restart-poweroff driver Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 18/19] MIPS: SEAD3: Use img-ascii-lcd driver Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 10/19] leds: Remove SEAD3 driver Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
    Re: [PATCH v2 10/19] leds: Remove SEAD3 driver Jacek Anaszewski <j.anaszewski@samsung.com> - 2016-08-29 11:00 +0200
      Re: [PATCH v2 10/19] leds: Remove SEAD3 driver Paul Burton <paul.burton@imgtec.com> - 2016-08-30 16:50 +0200
  [PATCH v2 05/19] MIPS: SEAD3: Probe ethernet controller using DT Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 17/19] auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:30 +0200
  [PATCH v2 01/19] MIPS: SEAD3: Split obj-y entries across lines Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:40 +0200
  [PATCH v2 19/19] MIPS: SEAD3: Remove custom read_persistent_clock Paul Burton <paul.burton@imgtec.com> - 2016-08-26 16:50 +0200

csiph-web