[PATCH 10/10] ARM: dts: da850-lcdk: enable the SATA node

From	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Newsgroups	linux.kernel
Subject	[PATCH 10/10] ARM: dts: da850-lcdk: enable the SATA node
Date	2017-01-13 13:50 +0100
Message-ID	<sZ9sR-Vi-5@gated-at.bofh.it> (permalink)
References	<sZ9sR-Vi-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Enable the SATA node for da850-lcdk. We omit the pinctrl property on
purpose - the muxed SATA pins are not hooked up to anything
SATA-related on the lcdk.

The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
15 for 1.5GHz PLL rate.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..1e638da 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -105,6 +105,11 @@
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+	da850,clk_multiplier = <15>;
+};
+
 &mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-- 
2.9.3

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH 10/10] ARM: dts: da850-lcdk: enable the SATA node Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-01-13 13:50 +0100

csiph-web