Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1557480

Re: [PATCH v8 1/1] crypto: add virtio-crypto driver

From "Michael S. Tsirkin" <mst@redhat.com>
Newsgroups linux.kernel
Subject Re: [PATCH v8 1/1] crypto: add virtio-crypto driver
Date 2017-01-12 15:30 +0100
Message-ID <sYOy6-52g-9@gated-at.bofh.it> (permalink)
References (1 earlier) <sOtOi-8jg-13@gated-at.bofh.it> <sY3IS-1gX-7@gated-at.bofh.it> <sY3Sx-1k3-1@gated-at.bofh.it> <sY4bT-1qK-5@gated-at.bofh.it> <sYOop-4Za-15@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Thu, Jan 12, 2017 at 03:10:25PM +0100, Christian Borntraeger wrote:
> On 01/10/2017 01:56 PM, Christian Borntraeger wrote:
> > On 01/10/2017 01:36 PM, Gonglei (Arei) wrote:
> >> Hi,
> >>
> >>>
> >>> On 12/15/2016 03:03 AM, Gonglei wrote:
> >>> [...]
> >>>> +
> >>>> +static struct crypto_alg virtio_crypto_algs[] = { {
> >>>> +	.cra_name = "cbc(aes)",
> >>>> +	.cra_driver_name = "virtio_crypto_aes_cbc",
> >>>> +	.cra_priority = 501,
> >>>
> >>>
> >>> This is still higher than the hardware-accelerators (like intel aesni or the
> >>> s390 cpacf functions or the arm hw). aesni and s390/cpacf are supported by the
> >>> hardware virtualization and available to the guests. I do not see a way how
> >>> virtio
> >>> crypto can be faster than that (in the end it might be cpacf/aesni + overhead)
> >>> instead it will very likely be slower.
> >>> So we should use a number that is higher than software implementations but
> >>> lower than the hw ones.
> >>>
> >>> Just grepping around, the software ones seem be be around 100 and the
> >>> hardware
> >>> ones around 200-400. So why was 150 not enough?
> >>>
> >> I didn't find a documentation about how we use the priority, and I assumed
> >> people use virtio-crypto will configure hardware accelerators in the
> >> host. So I choosed the number which bigger than aesni's priority.
> > 
> > Yes, but the aesni driver will only bind if there is HW support in the guest.
> > And if aesni is available in the guest (or the s390 aes function from cpacf)
> > it will always be faster than the same in the host via virtio.So your priority
> > should be smaller.
> 
> 
> any opinion on this? 

Going forward, we might add an emulated aesni device and that might
become slower than virtio. OTOH if or when this happens, we can solve it
by adding a priority or a feature flag to virtio to raise its priority.

So I think I agree with Christian here, let's lower the priority.
Gonglei, could you send a patch like this?

-- 
MST

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

Re: [PATCH v8 1/1] crypto: add virtio-crypto driver Christian Borntraeger <borntraeger@de.ibm.com> - 2017-01-10 13:30 +0100
  RE: [PATCH v8 1/1] crypto: add virtio-crypto driver "Gonglei (Arei)" <arei.gonglei@huawei.com> - 2017-01-10 13:40 +0100
    Re: [PATCH v8 1/1] crypto: add virtio-crypto driver Christian Borntraeger <borntraeger@de.ibm.com> - 2017-01-10 14:00 +0100
      Re: [PATCH v8 1/1] crypto: add virtio-crypto driver Christian Borntraeger <borntraeger@de.ibm.com> - 2017-01-12 15:20 +0100
        Re: [PATCH v8 1/1] crypto: add virtio-crypto driver "Michael S. Tsirkin" <mst@redhat.com> - 2017-01-12 15:30 +0100
          RE: [PATCH v8 1/1] crypto: add virtio-crypto driver "Gonglei (Arei)" <arei.gonglei@huawei.com> - 2017-01-13 03:00 +0100

csiph-web