Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1549573

Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe()

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Dear All,

A gentle ping for this patch :-)

We had a discussion about it in a following thread:

http://patchwork.ozlabs.org/patch/689786/

According to comments, I've prepared v2 of this commit and also resend
it recently:

http://patchwork.ozlabs.org/patch/708844/

Any new comments?


Thanks in advance,
Łukasz Majewski

> The commit a55944ca82d2 
> ("backlight: update bd state & fb_blank properties when necessary")
> has posed some extra restrictions on blanking and unblanking frame
> buffer device.
> 
> Unfortunately, pwm_bl driver's probe did not initialize members of
> struct backlight_device necessary for further blank/unblank operation.
> 
> This code in case of initial unblank of backlight device (default 
> behaviour) sets use_count to 1 and marks this particular backlight
> device as used by all available fb devices (since it is not known
> during probe how much and which fb devices will be assigned).
> 
> Without this code, the backlight works properly until one tries to
> blank it manually from sysfs with "echo 1
> > /sys/class/graphics/fb0/blank". Since fb_bl_on[0] and use_count
> > were both set to 0, the logic at
> fb_notifier_callback (@backlight.c) thought that we didn't turn on
> (unblanked) the backlight device and refuses to disable (blank) it.
> As a result we see garbage from fb displayed.
> 
> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> ---
> The patch has been tested on i.MX6q with vanilla 4.9 kernel.
> It applies on 4.10-rc1.
> ---
>  drivers/video/backlight/pwm_bl.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/video/backlight/pwm_bl.c
> b/drivers/video/backlight/pwm_bl.c index 1261400..6859ba0 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct
> platform_device *pdev) struct pwm_bl_data *pb;
>  	int initial_blank = FB_BLANK_UNBLANK;
>  	struct pwm_args pargs;
> -	int ret;
> +	int ret, i;
>  
>  	if (!data) {
>  		ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
> @@ -348,6 +348,14 @@ static int pwm_backlight_probe(struct
> platform_device *pdev) 
>  	bl->props.brightness = data->dft_brightness;
>  	bl->props.power = initial_blank;
> +
> +	if (initial_blank == FB_BLANK_UNBLANK) {
> +		for (i = 0; i < FB_MAX; i++)
> +			bl->fb_bl_on[i] = true;
> +
> +		bl->use_count = 1;
> +	}
> +
>  	backlight_update_status(bl);
>  
>  	platform_set_drvdata(pdev, bl);

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 RESEND] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe() Lukasz Majewski <l.majewski@majess.pl> - 2016-12-27 00:10 +0100
  Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize  fb_bl_on[x] and use_count during pwm_backlight_probe() Lukasz Majewski <l.majewski@majess.pl> - 2017-01-03 08:10 +0100
  Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize  fb_bl_on[x] and use_count during pwm_backlight_probe() Lee Jones <lee.jones@linaro.org> - 2017-01-03 09:30 +0100
    Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize  fb_bl_on[x] and use_count during pwm_backlight_probe() Lukasz Majewski <l.majewski@majess.pl> - 2017-01-06 15:30 +0100
    Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize  fb_bl_on[x] and use_count during pwm_backlight_probe() Lukasz Majewski <lukma@denx.de> - 2017-01-13 01:30 +0100

csiph-web